today we’re having a look at a motorized sit-stand desk…Flexispot Ec1 Review… you might have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s extremely easy to assemble, and it took my 11-year-old daughter and I (I mainly simply monitored) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. If you do not think me, take a look at the video below of it running while there’s a person lying down on it.
The electrical raise/lower feature is not just easy to use and quick, but it’s also surprisingly smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without providing it much idea.
On top of being functional, it also looks great in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a monitor stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also helpful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has choices that are even more budget friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t necessarily a huge fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, but this is just an effect of how sturdy the Flexispot is.
The convenient cable television tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to purchase an anti-fatigue mat to stay comfortable, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (since this meant it was going to be sturdy) and likewise a little reluctant (due to the fact that we all know how much of a challenge putting together furnishings can be).
The good news is, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
As soon as assembled, I like the sleek look of this desk. I’m confident any of the many diverse surfaces that it can be found in would look excellent in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it easy, effective, and peaceful to switch in between sitting and standing as sometimes as you desire throughout the day.
This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or want to rest on it for some reason) it has you covered. It will also uniformly disperse weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is pretty standard I tried to get as close to that as I might on uplifts site with similar configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is in fact 5 inches longer but you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation however as you should understand by now does not impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can potentially get doing not have even any cable grommets for travel through the outside carton
for the desktop was not harmed in any way which is utterly bizarre because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply extremely rough guy if I had acquired this I ‘d have been on the phone with customer support immediately they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function oddly definitely where any kind of cable television management products whatsoever the frame on this system is a single motor double phase style versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded as well to both the double phase double motor and a three-stage double motor which presses the cost of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this model does come basic with the control panel that allows for up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a price would be the one advantage I would give this unit over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% more affordable even if you update this flexi area test to the dual motor three-stage design it still can be found in a hundred and seventy dollars less expensive than the uplift however cheaper does not suggest low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal movement at this rate point it’s inappropriate it’s add fuel to the fire here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is absolutely shocking to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here harmed too my plan for this desk at this moment is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furnishings that will last you this at best seems like a more affordable imitation of that it simply does not feel quality and the difference in between this desk and my main desk is night and day do feel free to check out their site too which also feels eerily comparable to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk up to and including a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our precious time covering various choices and accessories I could however I think I’m better that they just sent a basic desk since as a basic desk I’m not a fan of the quality control at this rate point and I do not think slapping on a lot of extras is the relocation when the core item isn’t what it should be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years really desk is 5 years and uplift desk is seven years if you are Flexispot Ec1 Review
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and productivity however I would invest the additional money it’s gon na take to enter into a higher end producer like uplift desk or extremely desk and I have not personally used very desk products so I can’t speak on it however their reputation is excellent huge thanks to flexi spot for sending this out for evaluation regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters showed up damaged but from a client standpoint you ‘d probably be truly delighted to get this in