today we’re having a look at a motorized sit-stand desk…Flexispot Ec1… you may have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s really simple to assemble, and it took my 11-year-old child and I (I primarily simply monitored) under an hour from start to finish.
It’s super tough and can hold a lot of weight. If you don’t believe me, check out the video listed below of it operating while there’s a person resting on it.
The electrical raise/lower function is not just easy to use and quick, but it’s also remarkably smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without offering it much thought.
On top of being practical, it likewise looks excellent in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also practical if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has choices that are even more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t necessarily a big fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how tough the Flexispot is.
The practical cable television tray was a little bit complicated to install. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will need to purchase an anti-fatigue mat to remain comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (since this implied it was going to be strong) and also a little reluctant (since we all know how much of a difficulty assembling furnishings can be).
The good news is, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
As soon as assembled, I love the smooth look of this desk. I’m positive any of the many varied surfaces that it can be found in would look fantastic in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and peaceful to change in between sitting and standing as many times as you want throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or want to sleep on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
because video is quite kitted out as the desk we’re taking a look at today is quite standard I attempted to get as close to that as I could on uplifts website with similar setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is really 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for review however as you ought to know by now doesn’t impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can potentially get doing not have even any cable grommets for pass through the outside carton
for the desktop was not damaged in any way which is utterly unusual due to the fact that I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply incredibly rough guy if I had purchased this I ‘d have been on the phone with customer service immediately they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function oddly absolutely where any kind of cable television management materials whatsoever the frame on this unit is a single motor dual phase design versus the dual motor three-stage style that comes standard with the uplift desk this can be updated too to both the dual phase double motor and a three-stage double motor which presses the cost of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this design does come standard with the control panel that enables up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a cost would be the one advantage I would offer this system over the uplift desk and I want to take care here since this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift model over 35% less expensive even if you update this flexi area test to the double motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift but cheaper doesn’t suggest low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that but the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the noise is absolutely infuriating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged as well my plan for this desk at this moment is to lose the desk top and came with entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furniture that will last you this at finest seems like a cheaper imitation of that it just doesn’t feel quality and the difference between this desk and my main desk is night and day do do not hesitate to take a look at their website too which also feels eerily similar to among their competitors there’s a wealth of accessories you can get for the flexi spot desk up to and consisting of a foot massager and even a fixed stationary bicycle and I might spend another 10 minutes of our precious time covering various alternatives and devices I might however I believe I’m happier that they only sent out a fundamental desk since as a fundamental desk I’m not a fan of the quality control at this price point and I do not believe slapping on a lot of bonus is the move when the core item isn’t what it must be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years very desk is five years and uplift desk is seven years if you are Flexispot Ec1
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and productivity however I would spend the money it’s gon na require to get into a higher end producer like uplift desk or really desk and I haven’t personally utilized really desk products so I can’t speak on it however their credibility is excellent huge thanks to flexi spot for sending this out for evaluation regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters got here harmed but from a consumer standpoint you ‘d most likely be really thrilled to get this in