today we’re taking a look at a motorized sit-stand desk…Flexispot Ec1W-r4830W… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s extremely simple to put together, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s super sturdy and can hold a lot of weight. If you don’t think me, take a look at the video below of it operating while there’s an individual resting on it.
The electrical raise/lower function is not only easy to use and quick, however it’s likewise remarkably smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to change in between the two without offering it much thought.
On top of being practical, it likewise looks fantastic in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a screen stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also helpful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are much more budget friendly than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a big fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, but this is just an effect of how tough the Flexispot is.
The hassle-free cable tray was a little bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will need to buy an anti-fatigue mat to remain comfy, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (since this meant it was going to be strong) and also a little hesitant (due to the fact that all of us understand just how much of a challenge assembling furnishings can be).
The good news is, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t explained well in the instructions.
Is it worth getting a standing desk?
Once assembled, I enjoy the sleek look of this desk. I’m confident any of the many varied finishes that it comes in would look terrific in any office, and the adjustable width makes it easy to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, effective, and quiet to switch between sitting and standing as sometimes as you want throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a large desktop computer (or wish to sleep on it for some reason) it has you covered. It will likewise equally disperse weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is quite fundamental I attempted to get as near to that as I could on uplifts website with comparable configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is really five inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for review but as you should understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can potentially get doing not have even any cable grommets for pass through the outdoors carton
for the desktop was not harmed in any way which is entirely unusual since I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply extremely rough male if I had actually acquired this I ‘d have been on the phone with customer service immediately they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function unusually absolutely where any kind of cable management products whatsoever the frame on this system is a single motor double phase style versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded also to both the dual phase dual motor and a three-stage double motor which presses the cost of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this design does come standard with the control board that enables up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a cost would be the one advantage I would give this unit over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift model over 35% more affordable even if you update this flexi area test to the dual motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift but cheaper does not mean low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely provide it that but the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s add insult to injury here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the sound is absolutely infuriating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up harmed too my prepare for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality office furniture that will last you this at finest feels like a cheaper imitation of that it just does not feel quality and the difference in between this desk and my primary desk is night and day do feel free to check out their site also which likewise feels eerily similar to among their rivals there’s a wealth of devices you can get for the flexi spot desk approximately and including a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our valuable time covering different alternatives and devices I might but I believe I’m happier that they just sent a standard desk since as a fundamental desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a bunch of additionals is the move when the core product isn’t what it must be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years very desk is five years and uplift desk is seven years if you are Flexispot Ec1W-r4830W
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and performance however I would spend the money it’s gon na require to enter into a greater end producer like uplift desk or extremely desk and I haven’t personally used really desk products so I can’t speak on it however their credibility is great big thanks to flexi area for sending this out for review regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters arrived damaged however from a customer standpoint you ‘d most likely be really excited to get this in