today we’re taking a look at a motorized sit-stand desk…Flexispot Ec5 Erfahrungen… you may have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s very easy to put together, and it took my 11-year-old daughter and I (I mostly simply supervised) under an hour from start to finish.
It’s super strong and can hold a great deal of weight. Check out the video listed below of it operating while there’s an individual lying down on it if you do not believe me.
The electrical raise/lower function is not only easy to use and fast, but it’s also remarkably smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much thought.
On top of being functional, it also looks great in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also helpful if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are far more inexpensive than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t necessarily a substantial fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how durable the Flexispot is.
The practical cable tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will need to purchase an anti-fatigue mat to remain comfy, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (given that this suggested it was going to be strong) and likewise a little hesitant (since all of us understand just how much of an obstacle assembling furniture can be).
Fortunately, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t explained well in the directions.
Is it worth getting a standing desk?
Once assembled, I like the sleek appearance of this desk. I’m positive any of the many diverse finishes that it comes in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, efficient, and quiet to switch between sitting and standing as many times as you want throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a large desktop (or want to sleep on it for some reason) it has you covered. It will also uniformly distribute weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is pretty fundamental I tried to get as near to that as I might on uplifts site with similar setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is in fact five inches longer however you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation however as you should understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can possibly get doing not have even any cable grommets for pass through the outside carton
for the desktop was not damaged in any way which is entirely bizarre due to the fact that I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply incredibly rough man if I had acquired this I ‘d have been on the phone with customer support right away they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function oddly absolutely where any sort of cable management products whatsoever the frame on this system is a single motor double stage style versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded as well to both the dual phase dual motor and a three-stage double motor which presses the cost of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this design does come basic with the control panel that permits up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is very quiet as in barely audible this outside a cost would be the one benefit I would give this unit over the uplift desk and I want to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% more affordable even if you update this flexi spot test to the double motor three-stage design it still comes in a hundred and seventy dollars cheaper than the uplift but less expensive does not mean cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s add fuel to the fire here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the noise is definitely infuriating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters arrived damaged also my plan for this desk at this moment is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furniture that will last you this at best seems like a less expensive imitation of that it simply does not feel quality and the distinction in between this desk and my primary desk is night and day do do not hesitate to check out their site as well which also feels eerily similar to among their rivals there’s a wealth of devices you can get for the flexi spot desk as much as and including a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our precious time covering numerous options and accessories I might however I believe I’m better that they just sent out a standard desk because as a standard desk I’m not a fan of the quality assurance at this cost point and I don’t think slapping on a bunch of additionals is the relocation when the core item isn’t what it must be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years really desk is 5 years and uplift desk is 7 years if you are Flexispot Ec5 Erfahrungen
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and performance however I would spend the extra money it’s gon na require to enter into a higher end maker like uplift desk or very desk and I haven’t personally used extremely desk products so I can’t speak on it however their credibility is excellent big thanks to flexi spot for sending this out for review unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters got here harmed but from a consumer perspective you ‘d probably be truly excited to get this in