today we’re having a look at a motorized sit-stand desk…Flexispot Ec5 Test… you might have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was really positive.
It’s very easy to assemble, and it took my 11-year-old daughter and I (I primarily just monitored) under an hour from start to finish.
It’s incredibly sturdy and can hold a lot of weight. Inspect out the video listed below of it running while there’s a person lying down on it if you don’t think me.
The electrical raise/lower feature is not just easy to use and quick, however it’s also surprisingly smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without providing it much thought.
On top of being functional, it also looks terrific in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also helpful if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has alternatives that are much more inexpensive than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few functions that I wasn’t necessarily a substantial fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just an effect of how tough the Flexispot is.
The practical cable television tray was a little bit complicated to install. In the end, you eventually slip it under screws, which wasn’t very clear from the instructions.
You will need to purchase an anti-fatigue mat to remain comfortable, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (given that this meant it was going to be sturdy) and likewise a little reluctant (because all of us know just how much of an obstacle assembling furniture can be).
Fortunately, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the directions.
Is it worth getting a standing desk?
As soon as assembled, I love the smooth look of this desk. I’m positive any of the many diverse finishes that it can be found in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, effective, and quiet to switch in between sitting and standing as lot of times as you desire throughout the day.
Last but not least, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a significant home computer (or wish to rest on it for some reason) it has you covered. It will also uniformly distribute weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re looking at today is pretty basic I attempted to get as close to that as I could on uplifts site with comparable setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really 5 inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation but as you ought to understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get doing not have even any cable grommets for go through the outside container
for the desktop was not harmed in any way which is entirely strange because I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply incredibly rough man if I had actually acquired this I ‘d have been on the phone with client service instantly they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function strangely definitely where any type of cable management materials whatsoever the frame on this unit is a single motor double phase style versus the double motor three-stage style that comes standard with the uplift desk this can be updated as well to both the dual stage double motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this design does come basic with the control panel that enables up-and-down movement plus 3 memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a cost would be the one advantage I would offer this unit over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift however more affordable doesn’t mean inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that but the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s add insult to injury here they include a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the noise and this baffle is absolutely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here harmed also my prepare for this desk at this moment is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furnishings that will last you this at finest feels like a cheaper replica of that it just doesn’t feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to take a look at their website too which also feels eerily similar to among their rivals there’s a wealth of devices you can get for the flexi area desk approximately and including a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our precious time covering numerous options and accessories I could but I believe I’m happier that they just sent out a basic desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this cost point and I do not think slapping on a lot of additionals is the move when the core product isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years really desk is five years and uplift desk is 7 years if you are Flexispot Ec5 Test
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and productivity but I would invest the additional money it’s gon na require to enter into a greater end manufacturer like uplift desk or really desk and I haven’t personally used really desk items so I can’t speak on it but their track record is great big thanks to flexi area for sending this out for evaluation unfortunately I can not advise this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with viewing as how both the desktop and the casters arrived harmed but from a client standpoint you ‘d probably be really thrilled to get this in