today we’re taking a look at a motorized sit-stand desk…Flexispot Ed2S… you might have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very positive.
It’s really simple to assemble, and it took my 11-year-old child and I (I primarily just monitored) under an hour from start to finish.
It’s very sturdy and can hold a great deal of weight. If you don’t think me, check out the video listed below of it operating while there’s a person lying down on it.
The electric raise/lower feature is not only easy to use and quickly, but it’s likewise remarkably smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without giving it much thought.
On top of being functional, it also looks great in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also helpful if your furry coworker likes to chew on or have fun with your cables.
Flexispot has options that are even more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t always a huge fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how durable the Flexispot is.
The convenient cable tray was a little bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will need to buy an anti-fatigue mat to remain comfortable, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (since this meant it was going to be strong) and also a little reluctant (due to the fact that all of us know just how much of an obstacle putting together furniture can be).
The good news is, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t discussed well in the directions.
Is it worth getting a standing desk?
As soon as put together, I love the streamlined look of this desk. I’m confident any of the many varied finishes that it can be found in would look fantastic in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and quiet to change in between sitting and standing as many times as you desire throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a significant desktop computer (or want to take a nap on it for some reason) it has you covered. It will likewise equally distribute weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is pretty basic I tried to get as near that as I might on uplifts site with comparable configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is really 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review but as you ought to understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get lacking even any cable television grommets for pass through the outside container
for the desktop was not harmed in any way which is entirely strange because I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just super rough man if I had actually purchased this I ‘d have been on the phone with customer support immediately they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function oddly definitely where any kind of cable management products whatsoever the frame on this system is a single motor double stage style versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded too to both the double phase double motor and a three-stage double motor which presses the cost of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this model does come standard with the control board that enables up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a price would be the one advantage I would give this system over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% cheaper even if you update this flexi area test to the double motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift but less expensive doesn’t mean cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal motion at this price point it’s unacceptable it’s add insult to injury here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is definitely infuriating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived damaged as well my plan for this desk at this moment is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furnishings that will last you this at finest seems like a less expensive replica of that it simply does not feel quality and the distinction in between this desk and my primary desk is night and day do do not hesitate to take a look at their site as well which likewise feels eerily comparable to one of their rivals there’s a wealth of devices you can get for the flexi spot desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our valuable time covering different alternatives and accessories I might but I believe I’m better that they just sent a standard desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a lot of additionals is the move when the core item isn’t what it should be they do use a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years extremely desk is five years and uplift desk is seven years if you are Flexispot Ed2S
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and efficiency however I would invest the additional money it’s gon na take to enter into a greater end producer like uplift desk or really desk and I haven’t personally utilized extremely desk products so I can’t speak on it however their track record is great huge thanks to flexi area for sending this out for review sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters arrived damaged however from a client perspective you ‘d most likely be actually excited to get this in