today we’re having a look at a motorized sit-stand desk…Flexispot Ef1 Review… you may have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was very favorable.
It’s really simple to put together, and it took my 11-year-old child and I (I primarily simply supervised) under an hour from start to finish.
It’s super durable and can hold a lot of weight. If you do not think me, take a look at the video below of it running while there’s a person resting on it.
The electrical raise/lower feature is not just easy to use and quickly, however it’s likewise remarkably smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without providing it much thought.
On top of being functional, it likewise looks terrific in my office (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also practical if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has options that are even more budget-friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t necessarily a substantial fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how tough the Flexispot is.
The convenient cable tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will need to purchase an anti-fatigue mat to remain comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (since this meant it was going to be strong) and also a little reluctant (due to the fact that we all understand just how much of an obstacle putting together furniture can be).
The good news is, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I love the smooth appearance of this desk. I’m confident any of the many varied finishes that it can be found in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, effective, and quiet to change between sitting and standing as often times as you desire throughout the day.
Lastly, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or wish to take a nap on it for some reason) it has you covered. It will likewise uniformly distribute weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is pretty fundamental I attempted to get as near to that as I might on uplifts website with comparable setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really five inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation however as you should understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can perhaps get lacking even any cable grommets for travel through the outdoors carton
for the desktop was not harmed in any way which is entirely bizarre because I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just very rough male if I had acquired this I ‘d have been on the phone with customer service immediately they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function oddly absolutely where any kind of cable television management products whatsoever the frame on this system is a single motor double phase style versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded too to both the double phase double motor and a three-stage dual motor which presses the expense of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this model does come basic with the control board that permits up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a price would be the one advantage I would provide this system over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift design over 35% cheaper even if you upgrade this flexi spot test to the dual motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift but more affordable does not suggest inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely provide it that but the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is definitely frustrating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up damaged also my plan for this desk at this point is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furniture that will last you this at best feels like a less expensive imitation of that it just does not feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to check out their site as well which likewise feels strangely similar to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and consisting of a foot massager and even a stationary exercise bike and I might spend another 10 minutes of our precious time covering different options and accessories I might however I think I’m better that they just sent out a basic desk since as a basic desk I’m not a fan of the quality assurance at this rate point and I do not believe slapping on a bunch of additionals is the relocation when the core item isn’t what it need to be they do use a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years very desk is five years and uplift desk is 7 years if you are Flexispot Ef1 Review
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and performance but I would invest the extra money it’s gon na require to get into a greater end manufacturer like uplift desk or very desk and I haven’t personally utilized very desk products so I can’t speak on it but their credibility is great huge thanks to flexi spot for sending this out for evaluation unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with seeing as how both the desktop and the casters showed up harmed however from a client perspective you ‘d most likely be actually excited to get this in