today we’re taking a look at a motorized sit-stand desk…Flexispot Eg1/Ef1/Ez1… you might have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s extremely easy to put together, and it took my 11-year-old child and I (I mostly just monitored) under an hour from start to finish.
It’s super durable and can hold a lot of weight. Inspect out the video below of it operating while there’s a person lying down on it if you do not believe me.
The electric raise/lower feature is not just easy to use and fast, but it’s also surprisingly smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without giving it much thought.
On top of being practical, it likewise looks fantastic in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a screen stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise handy if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has choices that are even more inexpensive than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a substantial fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how sturdy the Flexispot is.
The practical cable television tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the guidelines.
You will require to purchase an anti-fatigue mat to remain comfy, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (given that this suggested it was going to be sturdy) and likewise a little hesitant (since we all know just how much of a difficulty assembling furniture can be).
The good news is, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
Once assembled, I enjoy the smooth appearance of this desk. I’m confident any of the many varied finishes that it can be found in would look great in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, efficient, and peaceful to change in between sitting and standing as sometimes as you want throughout the day.
Lastly, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop (or wish to rest on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re taking a look at today is quite fundamental I attempted to get as close to that as I might on uplifts website with equivalent configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is actually five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for review however as you must understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get lacking even any cable grommets for go through the outside carton
for the desktop was not damaged in any way which is absolutely strange since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply extremely rough man if I had actually purchased this I ‘d have been on the phone with customer support right away they did also handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function oddly definitely where any type of cable television management products whatsoever the frame on this unit is a single motor dual stage style versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded also to both the double phase double motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come basic with the control board that enables up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a price would be the one benefit I would give this system over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% cheaper even if you upgrade this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift however cheaper does not imply low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s rub salt in the wound here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is definitely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters got here harmed too my prepare for this desk at this moment is to lose the desk top and included entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furniture that will last you this at finest feels like a cheaper replica of that it just does not feel quality and the distinction between this desk and my primary desk is night and day do feel free to have a look at their site also which also feels eerily comparable to one of their rivals there’s a wealth of devices you can get for the flexi spot desk up to and including a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our precious time covering different choices and devices I could but I think I’m better that they only sent out a standard desk since as a fundamental desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a lot of additionals is the move when the core item isn’t what it need to be they do offer a 30-day trial if you’re just morbidly curious and they warranty their desks for three years very desk is five years and uplift desk is seven years if you are Flexispot Eg1/Ef1/Ez1
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and efficiency but I would invest the additional money it’s gon na take to enter a greater end manufacturer like uplift desk or very desk and I have not personally used very desk items so I can’t speak on it but their credibility is excellent huge thanks to flexi spot for sending this out for review regrettably I can not advise this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with seeing as how both the desktop and the casters arrived damaged but from a customer standpoint you ‘d probably be really excited to get this in