Find Flexispot Eg8 Electric Standing Desk 2022

today we’re taking a look at a motorized sit-stand desk…Flexispot Eg8 Electric Standing Desk… you might have seen my review on the uplift desk, if not …

In general, I should say I like the Flexispot E7.

here are a lot of things to like about the Flexispot E7. In general, my experience was really favorable.

It’s very simple to put together, and it took my 11-year-old child and I (I mainly just monitored) under an hour from start to finish.
It’s super strong and can hold a lot of weight. Check out the video below of it operating while there’s a person lying down on it if you don’t think me.

The electrical raise/lower function is not just easy to use and quickly, however it’s also surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without providing it much idea.
On top of being practical, it likewise looks terrific in my workplace (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a screen stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is likewise valuable if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are much more budget friendly than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons

Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t necessarily a big fan of:

The package that the desk came in was heavy, so bringing it inside was a group effort, however this is just an effect of how durable the Flexispot is.
The hassle-free cable television tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will require to purchase an anti-fatigue mat to remain comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.

When it got here and I saw how heavy it was, I was both thrilled (given that this indicated it was going to be strong) and also a little hesitant (because all of us know just how much of an obstacle putting together furniture can be).

Thankfully, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t explained well in the instructions.

When put together, I love the smooth look of this desk. I’m confident any of the many varied surfaces that it comes in would look great in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.

The quiet operation and height memory settings make it simple, efficient, and peaceful to switch between sitting and standing as lot of times as you desire throughout the day.

This desk is tough. It can hold up to 335 pounds even while in operation, so if you have a significant desktop (or want to rest on it for some reason) it has you covered. It will likewise equally distribute weight no matter how unbalanced the weight you put on it is, it will not wiggle or wobble.

 

in that video is quite kitted out as the desk we’re looking at today is quite basic I tried to get as near to that as I could on uplifts site with similar setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really 5 inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation but as you need to know by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get lacking even any cable grommets for travel through the outdoors carton

for the desktop was not harmed in any way which is entirely unusual because I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just very rough man if I had actually purchased this I ‘d have been on the phone with customer care instantly they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function oddly definitely where any type of cable management products whatsoever the frame on this system is a single motor dual stage style versus the dual motor three-stage style that comes standard with the uplift desk this can be updated also to both the double stage dual motor and a three-stage double motor which pushes the expense of the desk up

an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this design does come standard with the control board that permits up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a cost would be the one advantage I would provide this unit over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% cheaper even if you upgrade this flexi spot test to the double motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift however cheaper doesn’t imply cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s add insult to injury here they include a little security baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when

this desk sees any lateral movement at all the drive shaft hits the noise and this baffle is definitely infuriating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived harmed as well my prepare for this desk at this moment is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furnishings that will last you this at finest feels like a less expensive replica of that it simply doesn’t feel quality and the distinction in between this desk and my primary desk is night and day do do not hesitate to take a look at their website too which also feels strangely comparable to among their competitors there’s a wealth of accessories you can get for the flexi area desk approximately and consisting of a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our valuable time covering various choices and devices I might but I believe I’m better that they just sent a standard desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this price point and I do not think slapping on a lot of extras is the relocation when the core item isn’t what it must be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years really desk is 5 years and uplift desk is 7 years if you are Flexispot Eg8 Electric Standing Desk

in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and efficiency however I would invest the extra money it’s gon na take to enter into a higher end producer like uplift desk or really desk and I haven’t personally utilized really desk items so I can’t speak on it but their reputation is great huge thanks to flexi spot for sending this out for evaluation unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with seeing as how both the desktop and the casters showed up harmed but from a client standpoint you ‘d probably be actually delighted to get this in

Published