today we’re having a look at a motorized sit-stand desk…Flexispot Electric Desk Riser Em7Mb… you may have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s extremely simple to assemble, and it took my 11-year-old child and I (I primarily just supervised) under an hour from start to finish.
It’s extremely durable and can hold a great deal of weight. Check out the video below of it operating while there’s an individual lying down on it if you do not think me.
The electric raise/lower feature is not only easy to use and fast, however it’s likewise surprisingly smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much idea.
On top of being functional, it also looks terrific in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also helpful if your furry coworker likes to chew on or have fun with your cables.
Flexispot has choices that are even more inexpensive than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t necessarily a big fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how strong the Flexispot is.
The convenient cable television tray was a little bit complicated to install. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will require to buy an anti-fatigue mat to stay comfortable, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (because this indicated it was going to be durable) and likewise a little hesitant (since we all understand how much of a difficulty putting together furniture can be).
Luckily, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
Once put together, I like the sleek look of this desk. I’m positive any of the many varied surfaces that it is available in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, effective, and quiet to change between sitting and standing as sometimes as you want throughout the day.
Finally, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a significant home computer (or wish to sleep on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is pretty standard I tried to get as near to that as I could on uplifts website with similar configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is actually five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you should know by now doesn’t impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get lacking even any cable grommets for go through the outside container
for the desktop was not harmed in any way which is entirely unusual since I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply incredibly rough guy if I had bought this I ‘d have been on the phone with customer service immediately they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function unusually absolutely where any sort of cable television management materials whatsoever the frame on this unit is a single motor dual phase style versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded as well to both the dual phase dual motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come basic with the control board that enables up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a rate would be the one advantage I would provide this unit over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% more affordable even if you update this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift however cheaper doesn’t suggest inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that however the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s add insult to injury here they include a little security baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is absolutely infuriating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up damaged also my plan for this desk at this moment is to lose the desk top and included entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furnishings that will last you this at finest feels like a more affordable replica of that it just doesn’t feel quality and the distinction in between this desk and my main desk is night and day do feel free to take a look at their website too which also feels strangely comparable to among their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and including a foot massager and even a fixed stationary bicycle and I might spend another 10 minutes of our valuable time covering numerous options and accessories I might however I believe I’m happier that they only sent a standard desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this price point and I don’t believe slapping on a bunch of extras is the move when the core product isn’t what it need to be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years very desk is five years and uplift desk is seven years if you are Flexispot Electric Desk Riser Em7Mb
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and efficiency but I would spend the extra money it’s gon na take to enter a greater end producer like uplift desk or very desk and I haven’t personally used very desk products so I can’t speak on it but their credibility is excellent big thanks to flexi spot for sending this out for review unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with seeing as how both the desktop and the casters got here harmed however from a customer standpoint you ‘d probably be truly thrilled to get this in