today we’re taking a look at a motorized sit-stand desk…Flexispot En1S… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s very simple to put together, and it took my 11-year-old daughter and I (I mainly simply monitored) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. Examine out the video listed below of it running while there’s a person lying down on it if you don’t believe me.
The electric raise/lower feature is not only easy to use and quickly, but it’s likewise remarkably smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without giving it much idea.
On top of being functional, it also looks great in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a screen stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise helpful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has options that are far more budget friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t necessarily a big fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply an effect of how durable the Flexispot is.
The hassle-free cable tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will require to purchase an anti-fatigue mat to remain comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (because this suggested it was going to be durable) and also a little reluctant (since we all know how much of an obstacle putting together furnishings can be).
Fortunately, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t explained well in the directions.
Is it worth getting a standing desk?
Once assembled, I like the smooth appearance of this desk. I’m positive any of the many diverse surfaces that it can be found in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, efficient, and peaceful to switch in between sitting and standing as sometimes as you want throughout the day.
Lastly, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a substantial home computer (or wish to take a nap on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re taking a look at today is pretty fundamental I tried to get as close to that as I might on uplifts site with similar setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is actually five inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation however as you need to know by now does not affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can perhaps get doing not have even any cable television grommets for travel through the outdoors carton
for the desktop was not damaged in any way which is entirely bizarre since I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just extremely rough male if I had actually acquired this I ‘d have been on the phone with customer service instantly they did also handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function oddly definitely where any kind of cable television management materials whatsoever the frame on this unit is a single motor double stage style versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded also to both the double stage dual motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this model does come standard with the control panel that permits up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a cost would be the one advantage I would give this system over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% cheaper even if you update this flexi area test to the double motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift however less expensive does not suggest cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s rub salt in the wound here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the noise is absolutely frustrating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here damaged too my prepare for this desk at this point is to lose the desk top and featured completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furniture that will last you this at best feels like a less expensive imitation of that it simply does not feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to take a look at their site too which also feels eerily similar to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk up to and consisting of a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our valuable time covering different alternatives and accessories I could but I believe I’m better that they only sent a standard desk since as a fundamental desk I’m not a fan of the quality assurance at this price point and I don’t believe slapping on a bunch of extras is the relocation when the core item isn’t what it ought to be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years really desk is five years and uplift desk is seven years if you are Flexispot En1S
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and performance however I would invest the extra money it’s gon na take to enter into a higher end maker like uplift desk or very desk and I have not personally utilized extremely desk items so I can’t speak on it however their reputation is very good big thanks to flexi spot for sending this out for review unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with seeing as how both the desktop and the casters got here damaged however from a client perspective you ‘d most likely be truly excited to get this in