today we’re taking a look at a motorized sit-stand desk…Flexispot Exercise Desk Bike Review… you may have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely easy to assemble, and it took my 11-year-old child and I (I mainly simply supervised) under an hour from start to finish.
It’s extremely strong and can hold a lot of weight. Examine out the video listed below of it operating while there’s a person lying down on it if you do not believe me.
The electric raise/lower function is not just easy to use and quickly, however it’s likewise remarkably smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without providing it much idea.
On top of being functional, it likewise looks terrific in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a monitor stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise valuable if your furry colleague likes to chew on or have fun with your cables.
Flexispot has options that are even more cost effective than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t always a substantial fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how tough the Flexispot is.
The hassle-free cable tray was a little bit complicated to install. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (given that this meant it was going to be tough) and also a little reluctant (because all of us understand how much of a challenge putting together furnishings can be).
Luckily, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t explained well in the instructions.
Is it worth getting a standing desk?
Once assembled, I like the streamlined appearance of this desk. I’m positive any of the many diverse finishes that it comes in would look fantastic in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it easy, effective, and peaceful to change between sitting and standing as many times as you desire throughout the day.
Finally, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a significant desktop computer (or wish to sleep on it for some reason) it has you covered. It will also uniformly disperse weight no matter how unbalanced the weight you put on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is pretty basic I tried to get as near to that as I could on uplifts site with similar setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is in fact 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation but as you ought to understand by now does not affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get doing not have even any cable grommets for go through the outside container
for the desktop was not damaged in any way which is entirely unusual because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply super rough man if I had bought this I ‘d have been on the phone with customer care immediately they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function oddly definitely where any type of cable television management materials whatsoever the frame on this system is a single motor dual phase style versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded also to both the double phase dual motor and a three-stage double motor which presses the expense of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this model does come basic with the control board that permits up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a rate would be the one benefit I would provide this unit over the uplift desk and I wish to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift design over 35% less expensive even if you upgrade this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift but less expensive does not imply inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly provide it that however the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s rub salt in the wound here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is absolutely frustrating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters showed up damaged too my plan for this desk at this moment is to lose the desk top and included entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furnishings that will last you this at finest feels like a cheaper replica of that it just does not feel quality and the difference in between this desk and my primary desk is night and day do feel free to take a look at their website also which also feels strangely similar to one of their competitors there’s a wealth of accessories you can get for the flexi area desk as much as and including a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our precious time covering numerous options and devices I could however I think I’m better that they just sent a fundamental desk since as a standard desk I’m not a fan of the quality control at this price point and I do not believe slapping on a lot of bonus is the move when the core item isn’t what it must be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years extremely desk is five years and uplift desk is seven years if you are Flexispot Exercise Desk Bike Review
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and productivity but I would spend the extra money it’s gon na require to get into a greater end manufacturer like uplift desk or really desk and I haven’t personally utilized very desk products so I can’t speak on it but their reputation is great big thanks to flexi spot for sending this out for review regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with seeing as how both the desktop and the casters showed up damaged however from a consumer viewpoint you ‘d most likely be really thrilled to get this in