today we’re having a look at a motorized sit-stand desk…Flexispot F6… you may have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s extremely easy to assemble, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. If you don’t think me, check out the video listed below of it running while there’s an individual lying down on it.
The electrical raise/lower feature is not just easy to use and fast, however it’s likewise remarkably smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without offering it much idea.
On top of being functional, it likewise looks great in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a monitor stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also useful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has choices that are far more budget-friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t necessarily a huge fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply an effect of how sturdy the Flexispot is.
The hassle-free cable tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will require to purchase an anti-fatigue mat to remain comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (because this implied it was going to be tough) and likewise a little reluctant (since all of us understand how much of an obstacle putting together furnishings can be).
Thankfully, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I love the smooth look of this desk. I’m confident any of the many varied surfaces that it comes in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it easy, effective, and peaceful to switch between sitting and standing as sometimes as you desire throughout the day.
Lastly, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop (or wish to rest on it for some reason) it has you covered. It will also equally disperse weight no matter how unbalanced the weight you place on it is, it won’t wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is quite basic I attempted to get as close to that as I might on uplifts website with similar setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is really five inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review but as you must understand by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can possibly get doing not have even any cable grommets for pass through the outside container
for the desktop was not damaged in any way which is absolutely unusual due to the fact that I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just super rough male if I had actually bought this I ‘d have been on the phone with client service instantly they did also managed to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function strangely absolutely where any type of cable management materials whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage design that comes standard with the uplift desk this can be updated as well to both the dual phase dual motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this model does come standard with the control board that permits up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is extremely quiet as in barely audible this outside a rate would be the one advantage I would give this unit over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift model over 35% more affordable even if you upgrade this flexi area test to the dual motor three-stage design it still comes in a hundred and seventy dollars more affordable than the uplift however cheaper does not imply cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that but the lateral stability of this desk the horizontal movement at this rate point it’s inappropriate it’s add fuel to the fire here they consist of a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is absolutely shocking to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived damaged as well my plan for this desk at this point is to lose the desk top and came with all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality office furnishings that will last you this at finest seems like a less expensive replica of that it simply does not feel quality and the difference between this desk and my primary desk is night and day do feel free to take a look at their site as well which also feels eerily comparable to one of their rivals there’s a wealth of devices you can get for the flexi spot desk as much as and consisting of a foot massager and even a stationary stationary bicycle and I could spend another 10 minutes of our precious time covering various alternatives and accessories I could but I think I’m better that they just sent out a basic desk because as a fundamental desk I’m not a fan of the quality assurance at this rate point and I do not think slapping on a bunch of extras is the relocation when the core product isn’t what it ought to be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years very desk is five years and uplift desk is 7 years if you are Flexispot F6
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and efficiency however I would invest the additional money it’s gon na require to enter into a higher end maker like uplift desk or very desk and I have not personally used extremely desk products so I can’t speak on it but their credibility is very good huge thanks to flexi area for sending this out for review sadly I can not advise this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with seeing as how both the desktop and the casters showed up damaged however from a client perspective you ‘d most likely be truly thrilled to get this in