today we’re taking a look at a motorized sit-stand desk…Flexispot F6Ad… you might have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s extremely simple to put together, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s incredibly sturdy and can hold a great deal of weight. If you don’t believe me, check out the video below of it running while there’s an individual lying down on it.
The electric raise/lower function is not just easy to use and quickly, however it’s also surprisingly smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it easy to change between the two without offering it much thought.
On top of being functional, it also looks excellent in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also useful if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are far more economical than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t always a substantial fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how tough the Flexispot is.
The hassle-free cable tray was a little bit confusing to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to purchase an anti-fatigue mat to stay comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (since this implied it was going to be tough) and likewise a little hesitant (due to the fact that all of us know just how much of a challenge putting together furniture can be).
Thankfully, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t explained well in the directions.
Is it worth getting a standing desk?
Once assembled, I love the streamlined look of this desk. I’m confident any of the many varied finishes that it can be found in would look terrific in any office, and the adjustable width makes it easy to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it simple, efficient, and quiet to switch in between sitting and standing as often times as you desire throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a large desktop computer (or want to sleep on it for some reason) it has you covered. It will also uniformly distribute weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is quite fundamental I tried to get as near to that as I might on uplifts website with equivalent configurations the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is really 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you ought to know by now doesn’t impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get lacking even any cable grommets for travel through the outside container
for the desktop was not damaged in any way which is entirely strange because I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just extremely rough man if I had acquired this I ‘d have been on the phone with customer support instantly they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function unusually definitely where any type of cable management products whatsoever the frame on this unit is a single motor dual phase style versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated also to both the dual stage dual motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this design does come basic with the control panel that permits up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a price would be the one benefit I would offer this unit over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift however more affordable does not mean low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that but the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s add fuel to the fire here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is absolutely shocking to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here damaged as well my prepare for this desk at this point is to lose the desk top and featured completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furniture that will last you this at finest feels like a cheaper imitation of that it simply doesn’t feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to check out their website as well which likewise feels eerily comparable to among their competitors there’s a wealth of devices you can get for the flexi spot desk approximately and including a foot massager and even a stationary exercise bike and I might spend another 10 minutes of our precious time covering various options and devices I might but I think I’m happier that they just sent a standard desk because as a basic desk I’m not a fan of the quality assurance at this cost point and I do not think slapping on a bunch of additionals is the move when the core product isn’t what it ought to be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years really desk is 5 years and uplift desk is seven years if you are Flexispot F6Ad
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and performance however I would invest the additional money it’s gon na require to get into a greater end maker like uplift desk or extremely desk and I have not personally utilized extremely desk products so I can’t speak on it however their reputation is excellent huge thanks to flexi spot for sending this out for review sadly I can not advise this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with viewing as how both the desktop and the casters got here harmed but from a customer viewpoint you ‘d probably be truly thrilled to get this in