today we’re taking a look at a motorized sit-stand desk…Flexispot Full Sit-stand Desks… you may have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was really positive.
It’s extremely simple to put together, and it took my 11-year-old daughter and I (I mainly just monitored) under an hour from start to finish.
It’s extremely durable and can hold a great deal of weight. If you don’t think me, have a look at the video below of it operating while there’s a person resting on it.
The electric raise/lower function is not only easy to use and quick, however it’s likewise remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without offering it much thought.
On top of being functional, it likewise looks great in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a display stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also helpful if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has options that are even more cost effective than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t necessarily a huge fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, but this is simply an effect of how tough the Flexispot is.
The practical cable television tray was a little bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will need to buy an anti-fatigue mat to remain comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (since this indicated it was going to be tough) and also a little reluctant (since all of us know just how much of a difficulty assembling furnishings can be).
Thankfully, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
When put together, I like the smooth look of this desk. I’m confident any of the many varied finishes that it can be found in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and peaceful to change between sitting and standing as many times as you want throughout the day.
Finally, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a significant desktop computer (or want to rest on it for some reason) it has you covered. It will also uniformly disperse weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re taking a look at today is pretty basic I attempted to get as near to that as I might on uplifts website with equivalent setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review however as you need to know by now does not affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get lacking even any cable grommets for travel through the outside carton
for the desktop was not harmed in any way which is entirely unusual because I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply incredibly rough man if I had actually bought this I ‘d have been on the phone with customer service immediately they did likewise managed to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function strangely absolutely where any kind of cable management products whatsoever the frame on this unit is a single motor dual phase style versus the dual motor three-stage design that comes standard with the uplift desk this can be upgraded too to both the dual phase double motor and a three-stage double motor which presses the cost of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this design does come basic with the control panel that permits up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very peaceful as in barely audible this outside a rate would be the one advantage I would give this system over the uplift desk and I wish to be careful here since this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift however cheaper doesn’t imply low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal motion at this rate point it’s inappropriate it’s rub salt in the wound here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is definitely infuriating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up damaged also my prepare for this desk at this point is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furnishings that will last you this at finest feels like a more affordable replica of that it just does not feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to take a look at their site as well which also feels eerily similar to among their competitors there’s a wealth of accessories you can get for the flexi area desk up to and including a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our precious time covering numerous choices and accessories I might however I believe I’m better that they just sent out a fundamental desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this cost point and I do not think slapping on a lot of bonus is the relocation when the core item isn’t what it need to be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years very desk is five years and uplift desk is 7 years if you are Flexispot Full Sit-stand Desks
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and productivity however I would invest the extra money it’s gon na take to get into a higher end manufacturer like uplift desk or very desk and I have not personally utilized really desk items so I can’t speak on it however their reputation is great big thanks to flexi spot for sending this out for evaluation regrettably I can not suggest this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with seeing as how both the desktop and the casters arrived damaged but from a consumer viewpoint you ‘d probably be actually excited to get this in