today we’re having a look at a motorized sit-stand desk…Flexispot Full Sit-stand… you may have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s really easy to assemble, and it took my 11-year-old child and I (I mainly simply monitored) under an hour from start to finish.
It’s very sturdy and can hold a great deal of weight. Examine out the video below of it operating while there’s an individual lying down on it if you do not believe me.
The electrical raise/lower feature is not just easy to use and quick, but it’s likewise surprisingly smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without giving it much idea.
On top of being functional, it also looks fantastic in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a display stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise helpful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are far more economical than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t always a big fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how durable the Flexispot is.
The practical cable television tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will need to purchase an anti-fatigue mat to remain comfortable, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (because this indicated it was going to be strong) and likewise a little hesitant (due to the fact that we all understand just how much of a challenge putting together furniture can be).
Thankfully, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
When put together, I like the smooth look of this desk. I’m confident any of the many varied finishes that it comes in would look excellent in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it easy, effective, and quiet to change in between sitting and standing as lot of times as you desire throughout the day.
Last but not least, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a large desktop computer (or want to sleep on it for some reason) it has you covered. It will also uniformly distribute weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is pretty basic I tried to get as near to that as I could on uplifts site with similar configurations the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is actually 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you ought to know by now doesn’t affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering up until the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get doing not have even any cable grommets for pass through the outdoors carton
for the desktop was not harmed in any way which is utterly strange due to the fact that I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply incredibly rough man if I had acquired this I ‘d have been on the phone with customer support instantly they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function oddly definitely where any sort of cable television management products whatsoever the frame on this system is a single motor dual phase style versus the double motor three-stage style that comes standard with the uplift desk this can be updated too to both the double stage dual motor and a three-stage double motor which presses the expense of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this design does come standard with the control board that enables up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a cost would be the one advantage I would offer this system over the uplift desk and I wish to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% more affordable even if you update this flexi area test to the double motor three-stage design it still is available in a hundred and seventy dollars cheaper than the uplift however cheaper does not suggest inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that but the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s add fuel to the fire here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is absolutely infuriating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here harmed too my prepare for this desk at this point is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furniture that will last you this at best seems like a less expensive replica of that it simply doesn’t feel quality and the distinction between this desk and my primary desk is night and day do feel free to take a look at their site also which likewise feels strangely comparable to one of their rivals there’s a wealth of devices you can get for the flexi area desk up to and including a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our precious time covering various choices and devices I could however I believe I’m better that they only sent out a fundamental desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this rate point and I do not believe slapping on a bunch of extras is the move when the core product isn’t what it ought to be they do use a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years very desk is 5 years and uplift desk is 7 years if you are Flexispot Full Sit-stand
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and performance however I would invest the extra money it’s gon na require to enter into a higher end producer like uplift desk or extremely desk and I have not personally used extremely desk items so I can’t speak on it however their credibility is excellent big thanks to flexi area for sending this out for review sadly I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with seeing as how both the desktop and the casters got here damaged but from a consumer viewpoint you ‘d probably be truly thrilled to get this in