today we’re having a look at a motorized sit-stand desk…Flexispot H1B… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s extremely easy to assemble, and it took my 11-year-old child and I (I mainly just supervised) under an hour from start to finish.
It’s very strong and can hold a lot of weight. Examine out the video listed below of it operating while there’s an individual lying down on it if you don’t believe me.
The electric raise/lower function is not only easy to use and quickly, however it’s likewise remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without giving it much idea.
On top of being practical, it also looks fantastic in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is likewise useful if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are far more inexpensive than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t necessarily a big fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is just an effect of how sturdy the Flexispot is.
The convenient cable tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will require to purchase an anti-fatigue mat to remain comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (since this suggested it was going to be tough) and also a little reluctant (due to the fact that all of us know just how much of a difficulty assembling furniture can be).
The good news is, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I like the sleek look of this desk. I’m positive any of the many diverse surfaces that it can be found in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it easy, effective, and quiet to switch between sitting and standing as many times as you want throughout the day.
Lastly, this desk is durable. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or wish to rest on it for some reason) it has you covered. It will likewise equally distribute weight no matter how unbalanced the weight you put on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is quite standard I tried to get as close to that as I might on uplifts website with equivalent configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is really five inches longer however you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation but as you must understand by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get lacking even any cable television grommets for travel through the outside carton
for the desktop was not damaged in any way which is utterly strange because I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just super rough male if I had bought this I ‘d have been on the phone with client service instantly they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function oddly absolutely where any kind of cable management products whatsoever the frame on this system is a single motor double phase design versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated also to both the dual phase double motor and a three-stage double motor which presses the expense of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come standard with the control board that enables up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is very peaceful as in barely audible this outside a price would be the one advantage I would provide this system over the uplift desk and I wish to take care here since this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% more affordable even if you update this flexi area test to the dual motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift but more affordable does not imply cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s add insult to injury here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is definitely frustrating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived harmed also my plan for this desk at this point is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furniture that will last you this at finest seems like a more affordable imitation of that it just does not feel quality and the distinction in between this desk and my main desk is night and day do feel free to check out their website too which also feels strangely comparable to one of their competitors there’s a wealth of accessories you can get for the flexi area desk up to and consisting of a foot massager and even a fixed stationary bicycle and I might spend another 10 minutes of our precious time covering different alternatives and devices I might however I believe I’m happier that they just sent out a fundamental desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this price point and I do not think slapping on a bunch of additionals is the relocation when the core item isn’t what it must be they do provide a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years really desk is five years and uplift desk is seven years if you are Flexispot H1B
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and productivity however I would invest the money it’s gon na take to get into a higher end producer like uplift desk or extremely desk and I have not personally utilized really desk products so I can’t speak on it however their reputation is excellent huge thanks to flexi spot for sending this out for review regrettably I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with viewing as how both the desktop and the casters arrived harmed however from a client standpoint you ‘d most likely be truly excited to get this in