today we’re taking a look at a motorized sit-stand desk…Flexispot H1S… you may have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s extremely simple to put together, and it took my 11-year-old child and I (I mainly simply supervised) under an hour from start to finish.
It’s very durable and can hold a great deal of weight. Check out the video listed below of it running while there’s an individual lying down on it if you do not think me.
The electrical raise/lower feature is not only easy to use and quick, but it’s also remarkably smooth and quiet.
You can program your favored standing and sitting heights, and it will remember them, making it simple to change between the two without offering it much idea.
On top of being functional, it also looks great in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a screen stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is likewise useful if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has choices that are even more budget-friendly than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t always a substantial fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, however this is just a consequence of how durable the Flexispot is.
The practical cable television tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will need to purchase an anti-fatigue mat to stay comfy, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (because this indicated it was going to be durable) and likewise a little reluctant (due to the fact that we all understand just how much of a challenge putting together furniture can be).
Fortunately, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
As soon as assembled, I love the streamlined appearance of this desk. I’m confident any of the many diverse finishes that it can be found in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, efficient, and peaceful to switch in between sitting and standing as many times as you desire throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or wish to rest on it for some reason) it has you covered. It will also uniformly disperse weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is pretty fundamental I attempted to get as close to that as I could on uplifts site with equivalent setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact 5 inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation however as you need to know by now doesn’t impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get doing not have even any cable television grommets for pass through the outdoors carton
for the desktop was not harmed in any way which is absolutely strange because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just extremely rough male if I had purchased this I ‘d have been on the phone with client service instantly they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function unusually absolutely where any kind of cable management products whatsoever the frame on this unit is a single motor double phase design versus the double motor three-stage design that comes standard with the uplift desk this can be updated as well to both the dual stage dual motor and a three-stage dual motor which presses the expense of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this model does come basic with the control board that permits up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a rate would be the one benefit I would provide this system over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift model over 35% less expensive even if you upgrade this flexi area test to the dual motor three-stage style it still can be found in a hundred and seventy dollars cheaper than the uplift however more affordable doesn’t indicate inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that however the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s add insult to injury here they consist of a little security baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is definitely frustrating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived damaged also my prepare for this desk at this moment is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality office furnishings that will last you this at best seems like a less expensive imitation of that it simply does not feel quality and the difference between this desk and my main desk is night and day do feel free to check out their website too which likewise feels eerily similar to among their rivals there’s a wealth of accessories you can get for the flexi area desk up to and consisting of a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our precious time covering various choices and devices I could however I think I’m happier that they just sent a standard desk since as a basic desk I’m not a fan of the quality control at this price point and I don’t believe slapping on a lot of bonus is the move when the core product isn’t what it must be they do use a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years really desk is five years and uplift desk is seven years if you are Flexispot H1S
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and efficiency however I would invest the additional money it’s gon na take to enter into a higher end producer like uplift desk or very desk and I haven’t personally utilized very desk items so I can’t speak on it but their reputation is great big thanks to flexi spot for sending this out for evaluation sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters got here damaged but from a client standpoint you ‘d most likely be truly delighted to get this in