today we’re having a look at a motorized sit-stand desk…Flexispot H2… you may have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was really positive.
It’s really easy to assemble, and it took my 11-year-old child and I (I mainly simply monitored) under an hour from start to finish.
It’s super durable and can hold a lot of weight. If you do not think me, have a look at the video listed below of it running while there’s a person lying down on it.
The electric raise/lower feature is not only easy to use and quickly, but it’s likewise surprisingly smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without offering it much idea.
On top of being practical, it also looks excellent in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also helpful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has options that are much more affordable than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a huge fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how tough the Flexispot is.
The convenient cable tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the guidelines.
You will require to purchase an anti-fatigue mat to stay comfortable, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (since this suggested it was going to be tough) and likewise a little hesitant (since we all understand how much of an obstacle assembling furnishings can be).
Thankfully, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
As soon as put together, I love the smooth look of this desk. I’m positive any of the many diverse surfaces that it can be found in would look fantastic in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, effective, and peaceful to change between sitting and standing as many times as you want throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or wish to rest on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how unbalanced the weight you put on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is pretty basic I attempted to get as near that as I might on uplifts site with equivalent configurations the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is in fact five inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for evaluation but as you should know by now doesn’t affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can perhaps get lacking even any cable grommets for go through the outside carton
for the desktop was not harmed in any way which is entirely bizarre since I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply super rough male if I had actually bought this I ‘d have been on the phone with customer support immediately they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function unusually absolutely where any kind of cable television management products whatsoever the frame on this system is a single motor dual phase design versus the double motor three-stage style that comes requirement with the uplift desk this can be updated also to both the double phase double motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this design does come standard with the control panel that enables up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is extremely quiet as in barely audible this outside a rate would be the one advantage I would provide this system over the uplift desk and I wish to take care here since this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% less expensive even if you update this flexi spot test to the dual motor three-stage design it still can be found in a hundred and seventy dollars cheaper than the uplift however less expensive does not indicate cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s add insult to injury here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is absolutely infuriating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters showed up harmed too my prepare for this desk at this point is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furnishings that will last you this at finest feels like a cheaper replica of that it simply doesn’t feel quality and the distinction in between this desk and my main desk is night and day do feel free to take a look at their website too which also feels strangely similar to among their rivals there’s a wealth of devices you can get for the flexi spot desk as much as and including a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our precious time covering different alternatives and devices I could but I believe I’m happier that they only sent out a basic desk because as a standard desk I’m not a fan of the quality assurance at this price point and I do not think slapping on a bunch of extras is the relocation when the core product isn’t what it should be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years very desk is 5 years and uplift desk is seven years if you are Flexispot H2
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and performance but I would invest the extra money it’s gon na take to enter into a greater end producer like uplift desk or very desk and I have not personally used extremely desk items so I can’t speak on it but their credibility is great big thanks to flexi area for sending this out for review unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with viewing as how both the desktop and the casters showed up harmed but from a customer standpoint you ‘d most likely be actually excited to get this in