today we’re taking a look at a motorized sit-stand desk…Flexispot Height Adjustable Standing Desk Sit… you might have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was very positive.
It’s extremely easy to put together, and it took my 11-year-old daughter and I (I primarily just monitored) under an hour from start to finish.
It’s extremely strong and can hold a lot of weight. If you don’t believe me, check out the video listed below of it operating while there’s a person lying down on it.
The electric raise/lower function is not just easy to use and quickly, however it’s likewise surprisingly smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to change in between the two without offering it much idea.
On top of being practical, it also looks excellent in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise handy if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are much more cost effective than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t necessarily a huge fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, however this is simply an effect of how durable the Flexispot is.
The convenient cable tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to purchase an anti-fatigue mat to remain comfortable, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (given that this indicated it was going to be strong) and likewise a little reluctant (due to the fact that we all know just how much of a difficulty putting together furnishings can be).
The good news is, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t explained well in the instructions.
Is it worth getting a standing desk?
When put together, I love the sleek appearance of this desk. I’m positive any of the many diverse surfaces that it can be found in would look great in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The peaceful operation and height memory settings make it easy, efficient, and quiet to switch between sitting and standing as lot of times as you want throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop computer (or want to sleep on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is quite standard I tried to get as near that as I could on uplifts site with comparable setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is actually 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation but as you need to know by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get lacking even any cable television grommets for go through the outside carton
for the desktop was not damaged in any way which is entirely strange because I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply super rough man if I had bought this I ‘d have been on the phone with client service right away they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function strangely absolutely where any type of cable management materials whatsoever the frame on this unit is a single motor dual stage style versus the double motor three-stage style that comes requirement with the uplift desk this can be updated as well to both the dual phase double motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this model does come standard with the control board that permits up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a price would be the one benefit I would offer this system over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift model over 35% less expensive even if you update this flexi spot test to the double motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift however cheaper does not indicate low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely offer it that but the lateral stability of this desk the horizontal movement at this cost point it’s unacceptable it’s add fuel to the fire here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is absolutely infuriating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those four casters showed up damaged also my plan for this desk at this moment is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality workplace furniture that will last you this at best feels like a cheaper replica of that it simply does not feel quality and the difference between this desk and my main desk is night and day do feel free to check out their website as well which also feels eerily comparable to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I might spend another 10 minutes of our precious time covering different alternatives and devices I might however I believe I’m better that they only sent a fundamental desk because as a basic desk I’m not a fan of the quality control at this rate point and I don’t think slapping on a bunch of bonus is the relocation when the core product isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years very desk is 5 years and uplift desk is seven years if you are Flexispot Height Adjustable Standing Desk Sit
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and performance however I would spend the additional money it’s gon na take to enter a higher end manufacturer like uplift desk or very desk and I haven’t personally utilized extremely desk products so I can’t speak on it however their credibility is excellent huge thanks to flexi area for sending this out for evaluation unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with viewing as how both the desktop and the casters arrived harmed but from a consumer viewpoint you ‘d probably be really excited to get this in