today we’re having a look at a motorized sit-stand desk…Flexispot Height Adjustable Standing Desk… you might have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was really positive.
It’s very easy to assemble, and it took my 11-year-old child and I (I mainly just monitored) under an hour from start to finish.
It’s very tough and can hold a lot of weight. Check out the video below of it operating while there’s an individual lying down on it if you don’t think me.
The electrical raise/lower function is not just easy to use and quickly, but it’s also remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without providing it much thought.
On top of being functional, it likewise looks excellent in my workplace (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a display stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise helpful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has alternatives that are far more cost effective than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a substantial fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how tough the Flexispot is.
The convenient cable television tray was a little bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will require to purchase an anti-fatigue mat to remain comfy, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (considering that this meant it was going to be strong) and likewise a little hesitant (due to the fact that we all understand just how much of a challenge putting together furnishings can be).
Luckily, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
When put together, I like the sleek appearance of this desk. I’m confident any of the many varied surfaces that it can be found in would look great in any office, and the adjustable width makes it easy to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, efficient, and quiet to switch in between sitting and standing as often times as you want throughout the day.
This desk is tough. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or wish to sleep on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is pretty standard I tried to get as near that as I could on uplifts website with equivalent setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really five inches longer but you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation but as you need to know by now does not affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get lacking even any cable television grommets for go through the outdoors carton
for the desktop was not damaged in any way which is entirely unusual since I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply extremely rough guy if I had actually acquired this I ‘d have been on the phone with customer care instantly they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function unusually absolutely where any sort of cable management products whatsoever the frame on this system is a single motor double stage design versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded also to both the dual phase double motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come standard with the control board that permits up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a rate would be the one benefit I would give this unit over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% less expensive even if you update this flexi spot test to the dual motor three-stage style it still can be found in a hundred and seventy dollars cheaper than the uplift but more affordable does not imply low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal movement at this cost point it’s unacceptable it’s rub salt in the wound here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is absolutely shocking to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up damaged too my prepare for this desk at this moment is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality office furniture that will last you this at finest feels like a cheaper replica of that it simply doesn’t feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to check out their website as well which also feels strangely similar to one of their rivals there’s a wealth of accessories you can get for the flexi area desk up to and including a foot massager and even a fixed stationary bicycle and I might spend another 10 minutes of our precious time covering numerous choices and devices I could but I think I’m better that they just sent a fundamental desk since as a basic desk I’m not a fan of the quality assurance at this cost point and I do not believe slapping on a bunch of extras is the relocation when the core product isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot Height Adjustable Standing Desk
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and productivity but I would invest the money it’s gon na require to enter into a greater end manufacturer like uplift desk or really desk and I have not personally used very desk products so I can’t speak on it however their track record is very good huge thanks to flexi spot for sending this out for evaluation unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with seeing as how both the desktop and the casters got here damaged but from a consumer perspective you ‘d probably be really delighted to get this in