today we’re taking a look at a motorized sit-stand desk…Flexispot Installation Guide Ec1B… you might have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was really favorable.
It’s really simple to put together, and it took my 11-year-old child and I (I primarily just supervised) under an hour from start to finish.
It’s incredibly durable and can hold a lot of weight. Examine out the video listed below of it running while there’s a person lying down on it if you don’t believe me.
The electrical raise/lower function is not just easy to use and fast, however it’s also remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much idea.
On top of being practical, it likewise looks great in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a monitor stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also handy if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are far more cost effective than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of functions that I wasn’t always a substantial fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how sturdy the Flexispot is.
The convenient cable tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to buy an anti-fatigue mat to stay comfy, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (since this suggested it was going to be sturdy) and likewise a little reluctant (because all of us understand just how much of a challenge putting together furnishings can be).
Fortunately, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
Once assembled, I like the smooth look of this desk. I’m confident any of the many diverse finishes that it is available in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it easy, efficient, and quiet to switch in between sitting and standing as sometimes as you desire throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop (or want to sleep on it for some reason) it has you covered. It will also uniformly disperse weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is quite standard I attempted to get as near that as I could on uplifts website with comparable setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is in fact five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you should understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get doing not have even any cable grommets for travel through the outdoors carton
for the desktop was not damaged in any way which is entirely unusual because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply extremely rough man if I had purchased this I ‘d have been on the phone with customer service immediately they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function strangely absolutely where any kind of cable management materials whatsoever the frame on this unit is a single motor double stage style versus the dual motor three-stage style that comes standard with the uplift desk this can be updated also to both the dual phase double motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this model does come basic with the control panel that permits up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a rate would be the one advantage I would offer this system over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift model over 35% cheaper even if you upgrade this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift however less expensive doesn’t mean cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely provide it that but the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s rub salt in the wound here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is definitely infuriating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here harmed also my plan for this desk at this point is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furnishings that will last you this at finest feels like a less expensive replica of that it just does not feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to take a look at their website too which also feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi spot desk as much as and including a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our precious time covering various alternatives and devices I might however I believe I’m better that they just sent a fundamental desk since as a standard desk I’m not a fan of the quality control at this cost point and I don’t think slapping on a bunch of additionals is the move when the core item isn’t what it should be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years very desk is 5 years and uplift desk is 7 years if you are Flexispot Installation Guide Ec1B
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and performance however I would invest the extra money it’s gon na take to enter a greater end producer like uplift desk or extremely desk and I have not personally utilized extremely desk products so I can’t speak on it however their reputation is great big thanks to flexi area for sending this out for review regrettably I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters showed up harmed but from a client standpoint you ‘d most likely be actually delighted to get this in