Find Flexispot Kana Desk 2022

today we’re taking a look at a motorized sit-stand desk…Flexispot Kana Desk… you may have seen my review on the uplift desk, if not …

In general, I need to state I like the Flexispot E7.

here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really positive.

It’s really simple to assemble, and it took my 11-year-old child and I (I primarily just monitored) under an hour from start to finish.
It’s incredibly durable and can hold a great deal of weight. Check out the video below of it running while there’s a person lying down on it if you don’t believe me.

The electric raise/lower feature is not just easy to use and fast, but it’s also remarkably smooth and quiet.
You can program your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without providing it much idea.
On top of being practical, it also looks great in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a monitor stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also practical if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has choices that are far more budget-friendly than numerous other desks like it.
Flexispot Standing Desk Review – Cons

Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t necessarily a substantial fan of:

The package that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just a consequence of how strong the Flexispot is.
The hassle-free cable tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will need to purchase an anti-fatigue mat to stay comfortable, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.

When it showed up and I saw how heavy it was, I was both excited (given that this meant it was going to be tough) and also a little hesitant (since all of us understand how much of a challenge assembling furnishings can be).

Luckily, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t described well in the guidelines.

As soon as put together, I enjoy the smooth look of this desk. I’m positive any of the many diverse finishes that it can be found in would look great in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.

The peaceful operation and height memory settings make it simple, efficient, and peaceful to change in between sitting and standing as many times as you desire throughout the day.

Last but not least, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a significant desktop computer (or want to sleep on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.

 

in that video is pretty kitted out as the desk we’re looking at today is pretty fundamental I tried to get as close to that as I might on uplifts website with comparable configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is actually five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review however as you ought to know by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can perhaps get lacking even any cable television grommets for travel through the outdoors carton

for the desktop was not harmed in any way which is utterly strange because I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just extremely rough male if I had bought this I ‘d have been on the phone with customer support immediately they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function oddly definitely where any sort of cable management products whatsoever the frame on this system is a single motor dual stage design versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the double stage dual motor and a three-stage dual motor which presses the cost of the desk up

an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this model does come basic with the control panel that allows for up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a rate would be the one advantage I would offer this system over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift model over 35% cheaper even if you update this flexi area test to the dual motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift however more affordable does not mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that but the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when

this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is definitely infuriating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived damaged too my prepare for this desk at this moment is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furnishings that will last you this at best feels like a less expensive imitation of that it simply does not feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to check out their website also which likewise feels strangely comparable to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk up to and consisting of a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our precious time covering numerous options and devices I could but I think I’m better that they only sent out a fundamental desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this price point and I don’t believe slapping on a lot of bonus is the move when the core product isn’t what it should be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years extremely desk is five years and uplift desk is seven years if you are Flexispot Kana Desk

in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and productivity but I would spend the money it’s gon na require to get into a greater end manufacturer like uplift desk or really desk and I haven’t personally used very desk products so I can’t speak on it however their track record is very good huge thanks to flexi area for sending this out for evaluation unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters showed up harmed however from a consumer perspective you ‘d most likely be really delighted to get this in

Published