Find Flexispot Kana Pro Standing Desk Ec8 2022

today we’re having a look at a motorized sit-stand desk…Flexispot Kana Pro Standing Desk Ec8… you might have seen my evaluation on the uplift desk, if not …

In general, I need to say I like the Flexispot E7.

here are plenty of things to love about the Flexispot E7. In general, my experience was really positive.

It’s really simple to assemble, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s very tough and can hold a lot of weight. If you do not believe me, take a look at the video listed below of it running while there’s an individual resting on it.

The electrical raise/lower function is not only easy to use and fast, but it’s also remarkably smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without offering it much idea.
On top of being functional, it also looks excellent in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also valuable if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has choices that are even more cost effective than lots of other desks like it.
Flexispot Standing Desk Review – Cons

Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t always a substantial fan of:

The package that the desk was available in was heavy, so bringing it inside was a group effort, but this is just an effect of how strong the Flexispot is.
The hassle-free cable tray was a little bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the guidelines.
You will require to buy an anti-fatigue mat to remain comfortable, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.

When it arrived and I saw how heavy it was, I was both thrilled (since this suggested it was going to be tough) and also a little hesitant (due to the fact that we all know how much of a difficulty putting together furniture can be).

The good news is, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t described well in the instructions.

Once put together, I love the sleek appearance of this desk. I’m positive any of the many diverse surfaces that it is available in would look terrific in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.

The quiet operation and height memory settings make it simple, effective, and peaceful to change between sitting and standing as sometimes as you want throughout the day.

This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a substantial home computer (or want to take a nap on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.

 

because video is quite kitted out as the desk we’re taking a look at today is pretty basic I attempted to get as near that as I could on uplifts website with equivalent setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is really 5 inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for review but as you need to understand by now does not affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can potentially get doing not have even any cable television grommets for travel through the outside container

for the desktop was not harmed in any way which is entirely bizarre due to the fact that I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just extremely rough guy if I had acquired this I ‘d have been on the phone with client service instantly they did also handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function unusually absolutely where any type of cable management materials whatsoever the frame on this unit is a single motor double phase style versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded too to both the dual stage double motor and a three-stage double motor which pushes the cost of the desk up

an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this design does come basic with the control panel that enables up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a rate would be the one benefit I would provide this unit over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift model over 35% cheaper even if you update this flexi area test to the double motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift but cheaper doesn’t suggest cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s add insult to injury here they consist of a little security baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when

this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is definitely shocking to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here damaged too my plan for this desk at this point is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furnishings that will last you this at finest feels like a cheaper replica of that it just doesn’t feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to take a look at their site as well which likewise feels strangely comparable to among their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and including a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our precious time covering numerous options and devices I could however I believe I’m happier that they just sent a standard desk because as a standard desk I’m not a fan of the quality assurance at this rate point and I do not think slapping on a lot of bonus is the move when the core item isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years really desk is five years and uplift desk is 7 years if you are Flexispot Kana Pro Standing Desk Ec8

in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and performance but I would invest the additional money it’s gon na require to enter a higher end maker like uplift desk or very desk and I haven’t personally used really desk items so I can’t speak on it but their reputation is very good huge thanks to flexi spot for sending this out for evaluation regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with seeing as how both the desktop and the casters got here damaged but from a customer standpoint you ‘d most likely be truly excited to get this in

Published