Find Flexispot Kana Pro 2022

today we’re taking a look at a motorized sit-stand desk…Flexispot Kana Pro… you may have seen my evaluation on the uplift desk, if not …

In general, I need to state I like the Flexispot E7.

here are lots of things to like about the Flexispot E7. In general, my experience was extremely positive.

It’s very easy to put together, and it took my 11-year-old child and I (I primarily simply monitored) under an hour from start to finish.
It’s super tough and can hold a lot of weight. If you do not believe me, check out the video below of it operating while there’s an individual lying down on it.

The electric raise/lower feature is not only easy to use and quick, but it’s likewise surprisingly smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without providing it much idea.
On top of being practical, it also looks fantastic in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a monitor stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise practical if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has options that are even more inexpensive than many other desks like it.
Flexispot Standing Desk Evaluation – Cons

Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t always a big fan of:

The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how durable the Flexispot is.
The practical cable television tray was a little bit complicated to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will require to buy an anti-fatigue mat to remain comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.

When it showed up and I saw how heavy it was, I was both excited (considering that this indicated it was going to be tough) and also a little reluctant (because all of us know just how much of a challenge putting together furnishings can be).

Thankfully, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the instructions.

Once put together, I like the streamlined appearance of this desk. I’m positive any of the many varied finishes that it is available in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.

The quiet operation and height memory settings make it easy, efficient, and quiet to switch in between sitting and standing as lot of times as you want throughout the day.

This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a large desktop computer (or wish to take a nap on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.

 

because video is pretty kitted out as the desk we’re taking a look at today is pretty standard I tried to get as close to that as I might on uplifts site with equivalent configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is really five inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation but as you should understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get lacking even any cable grommets for go through the outside carton

for the desktop was not damaged in any way which is absolutely strange because I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply super rough guy if I had actually acquired this I ‘d have been on the phone with customer service instantly they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function oddly definitely where any sort of cable management materials whatsoever the frame on this unit is a single motor dual phase design versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded too to both the dual phase dual motor and a three-stage dual motor which presses the cost of the desk up

an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this design does come basic with the control panel that permits up-and-down movement plus 3 memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a price would be the one advantage I would offer this unit over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% less expensive even if you upgrade this flexi spot test to the dual motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift however cheaper does not indicate inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely offer it that but the lateral stability of this desk the horizontal movement at this price point it’s undesirable it’s add insult to injury here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when

this desk sees any lateral motion at all the drive shaft strikes the noise and this baffle is definitely infuriating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up damaged as well my plan for this desk at this point is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality workplace furniture that will last you this at best feels like a cheaper replica of that it simply doesn’t feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to take a look at their website also which also feels eerily comparable to one of their rivals there’s a wealth of accessories you can get for the flexi area desk as much as and including a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our valuable time covering various alternatives and devices I could but I believe I’m better that they just sent out a fundamental desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a lot of bonus is the move when the core product isn’t what it should be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years extremely desk is 5 years and uplift desk is seven years if you are Flexispot Kana Pro

in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and performance but I would spend the additional money it’s gon na require to enter into a greater end producer like uplift desk or extremely desk and I haven’t personally utilized very desk items so I can’t speak on it but their track record is very good huge thanks to flexi area for sending this out for review unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with viewing as how both the desktop and the casters arrived harmed but from a customer viewpoint you ‘d probably be actually delighted to get this in

Published