today we’re having a look at a motorized sit-stand desk…Flexispot Kana Review… you may have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely easy to assemble, and it took my 11-year-old child and I (I mostly just supervised) under an hour from start to finish.
It’s extremely tough and can hold a great deal of weight. If you do not believe me, check out the video below of it operating while there’s an individual resting on it.
The electrical raise/lower function is not just easy to use and fast, but it’s also surprisingly smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without providing it much thought.
On top of being functional, it also looks fantastic in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a screen stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also practical if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has options that are even more budget-friendly than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t necessarily a huge fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how strong the Flexispot is.
The convenient cable tray was a little bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will need to purchase an anti-fatigue mat to remain comfy, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (since this suggested it was going to be tough) and likewise a little hesitant (due to the fact that we all understand just how much of a challenge assembling furniture can be).
Luckily, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
Once assembled, I like the smooth look of this desk. I’m confident any of the many varied surfaces that it comes in would look great in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it easy, effective, and peaceful to switch between sitting and standing as sometimes as you want throughout the day.
This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or wish to rest on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is quite fundamental I tried to get as near that as I could on uplifts website with comparable configurations the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is really 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you must understand by now doesn’t affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can perhaps get lacking even any cable grommets for pass through the outdoors container
for the desktop was not damaged in any way which is utterly bizarre because I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply incredibly rough male if I had acquired this I ‘d have been on the phone with client service instantly they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function oddly absolutely where any sort of cable television management products whatsoever the frame on this system is a single motor dual stage style versus the double motor three-stage style that comes requirement with the uplift desk this can be updated too to both the dual stage double motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this design does come standard with the control board that allows for up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be slow is very peaceful as in barely audible this outside a cost would be the one benefit I would give this system over the uplift desk and I wish to be careful here because this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift model over 35% cheaper even if you update this flexi area test to the double motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift however less expensive does not imply inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal movement at this cost point it’s inappropriate it’s add insult to injury here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is absolutely shocking to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here damaged too my prepare for this desk at this moment is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality office furniture that will last you this at best seems like a less expensive imitation of that it just does not feel quality and the difference between this desk and my primary desk is night and day do feel free to have a look at their site also which also feels eerily similar to among their competitors there’s a wealth of accessories you can get for the flexi spot desk as much as and including a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our valuable time covering various alternatives and accessories I might but I believe I’m better that they only sent a basic desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this rate point and I do not believe slapping on a lot of bonus is the move when the core product isn’t what it need to be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years extremely desk is five years and uplift desk is seven years if you are Flexispot Kana Review
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and performance however I would invest the additional money it’s gon na require to enter into a higher end producer like uplift desk or extremely desk and I haven’t personally used extremely desk items so I can’t speak on it but their credibility is great huge thanks to flexi spot for sending this out for review regrettably I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with seeing as how both the desktop and the casters arrived damaged however from a consumer perspective you ‘d most likely be truly delighted to get this in