Find Flexispot, Las Positas Road, Livermore, Ca 2022

today we’re taking a look at a motorized sit-stand desk…Flexispot, Las Positas Road, Livermore, Ca… you might have seen my evaluation on the uplift desk, if not …

In general, I must state I like the Flexispot E7.

here are lots of things to enjoy about the Flexispot E7. In general, my experience was very favorable.

It’s really easy to put together, and it took my 11-year-old child and I (I mainly simply monitored) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. Check out the video below of it running while there’s a person lying down on it if you don’t believe me.

The electrical raise/lower function is not just easy to use and fast, but it’s also surprisingly smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much thought.
On top of being practical, it also looks great in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is also handy if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has options that are even more budget friendly than numerous other desks like it.
Flexispot Standing Desk Review – Cons

Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t always a huge fan of:

The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how strong the Flexispot is.
The convenient cable tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the directions.
You will need to buy an anti-fatigue mat to remain comfy, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.

When it arrived and I saw how heavy it was, I was both thrilled (because this meant it was going to be strong) and likewise a little reluctant (due to the fact that all of us know just how much of an obstacle assembling furnishings can be).

The good news is, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t discussed well in the instructions.

Once assembled, I like the streamlined look of this desk. I’m positive any of the many varied surfaces that it comes in would look terrific in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.

The peaceful operation and height memory settings make it simple, efficient, and quiet to switch between sitting and standing as lot of times as you desire throughout the day.

This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop computer (or want to sleep on it for some reason) it has you covered. It will also uniformly distribute weight no matter how unbalanced the weight you place on it is, it won’t wobble or wiggle.

 

in that video is pretty kitted out as the desk we’re looking at today is pretty fundamental I tried to get as close to that as I might on uplifts website with similar configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is actually 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review but as you must know by now doesn’t impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can potentially get doing not have even any cable television grommets for travel through the outdoors carton

for the desktop was not harmed in any way which is absolutely unusual since I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply very rough guy if I had actually purchased this I ‘d have been on the phone with client service right away they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function strangely definitely where any sort of cable management products whatsoever the frame on this unit is a single motor double stage style versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded also to both the dual stage double motor and a three-stage dual motor which pushes the expense of the desk up

an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this design does come basic with the control panel that allows for up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a rate would be the one benefit I would offer this system over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% more affordable even if you update this flexi spot test to the dual motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift however less expensive does not indicate low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal movement at this price point it’s undesirable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when

this desk sees any lateral motion at all the drive shaft hits this baffle and the noise is definitely shocking to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged also my plan for this desk at this moment is to lose the desk top and came with entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furniture that will last you this at finest seems like a cheaper imitation of that it just doesn’t feel quality and the difference between this desk and my main desk is night and day do do not hesitate to have a look at their site too which also feels eerily similar to one of their rivals there’s a wealth of devices you can get for the flexi area desk approximately and consisting of a foot massager and even a stationary exercise bike and I might spend another 10 minutes of our precious time covering different choices and devices I could however I believe I’m better that they just sent out a basic desk because as a standard desk I’m not a fan of the quality control at this rate point and I don’t think slapping on a lot of bonus is the relocation when the core product isn’t what it ought to be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years really desk is 5 years and uplift desk is seven years if you are Flexispot, Las Positas Road, Livermore, Ca

in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and efficiency however I would invest the money it’s gon na take to enter into a greater end producer like uplift desk or very desk and I have not personally utilized extremely desk items so I can’t speak on it but their credibility is excellent huge thanks to flexi spot for sending this out for evaluation sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with viewing as how both the desktop and the casters showed up damaged but from a consumer perspective you ‘d probably be actually excited to get this in

Published