today we’re having a look at a motorized sit-stand desk…Flexispot Livermoore… you might have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was extremely favorable.
It’s very easy to assemble, and it took my 11-year-old daughter and I (I primarily simply supervised) under an hour from start to finish.
It’s very durable and can hold a great deal of weight. If you don’t think me, have a look at the video below of it running while there’s an individual resting on it.
The electric raise/lower feature is not just easy to use and quickly, but it’s likewise remarkably smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it simple to change in between the two without providing it much idea.
On top of being practical, it also looks fantastic in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a monitor stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also useful if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has choices that are far more affordable than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of features that I wasn’t always a big fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how tough the Flexispot is.
The hassle-free cable television tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will require to purchase an anti-fatigue mat to stay comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (because this indicated it was going to be tough) and likewise a little hesitant (because we all know how much of an obstacle assembling furnishings can be).
The good news is, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
Once put together, I like the smooth appearance of this desk. I’m confident any of the many diverse surfaces that it is available in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, efficient, and peaceful to change between sitting and standing as lot of times as you want throughout the day.
This desk is durable. It can hold up to 335 lbs even while in operation, so if you have a large desktop computer (or want to sleep on it for some reason) it has you covered. It will also uniformly disperse weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is quite basic I attempted to get as close to that as I could on uplifts website with similar setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is in fact five inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review however as you must understand by now does not impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get lacking even any cable television grommets for pass through the outdoors container
for the desktop was not harmed in any way which is entirely bizarre since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just extremely rough guy if I had actually bought this I ‘d have been on the phone with customer care immediately they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function unusually absolutely where any sort of cable television management products whatsoever the frame on this system is a single motor double phase design versus the double motor three-stage style that comes requirement with the uplift desk this can be updated too to both the double phase double motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this model does come basic with the control board that allows for up-and-down motion plus three memory spots with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a price would be the one benefit I would give this system over the uplift desk and I wish to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% less expensive even if you upgrade this flexi spot test to the dual motor three-stage design it still comes in a hundred and seventy dollars more affordable than the uplift however less expensive doesn’t imply cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely provide it that but the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s add insult to injury here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits the noise and this baffle is definitely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those four casters got here harmed also my prepare for this desk at this moment is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furnishings that will last you this at best feels like a cheaper replica of that it simply does not feel quality and the distinction between this desk and my main desk is night and day do feel free to check out their site as well which likewise feels strangely similar to among their rivals there’s a wealth of devices you can get for the flexi spot desk approximately and including a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our valuable time covering different alternatives and devices I could however I believe I’m happier that they just sent out a fundamental desk due to the fact that as a standard desk I’m not a fan of the quality control at this cost point and I do not believe slapping on a lot of extras is the relocation when the core item isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years really desk is 5 years and uplift desk is 7 years if you are Flexispot Livermoore
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and efficiency however I would spend the extra money it’s gon na require to enter a greater end maker like uplift desk or very desk and I have not personally used very desk items so I can’t speak on it however their reputation is excellent huge thanks to flexi area for sending this out for review unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with seeing as how both the desktop and the casters arrived damaged however from a customer perspective you ‘d probably be really thrilled to get this in