today we’re having a look at a motorized sit-stand desk…Flexispot M Features… you might have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was really positive.
It’s very simple to put together, and it took my 11-year-old child and I (I mostly just supervised) under an hour from start to finish.
It’s super sturdy and can hold a lot of weight. Check out the video below of it operating while there’s a person lying down on it if you do not think me.
The electrical raise/lower function is not only easy to use and fast, but it’s also surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without providing it much idea.
On top of being practical, it also looks fantastic in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a screen stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also handy if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has choices that are much more inexpensive than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a big fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how strong the Flexispot is.
The hassle-free cable television tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will require to buy an anti-fatigue mat to stay comfortable, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (since this indicated it was going to be strong) and also a little reluctant (since all of us know just how much of a challenge putting together furnishings can be).
Thankfully, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
Once put together, I love the smooth appearance of this desk. I’m confident any of the many varied finishes that it is available in would look great in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it easy, effective, and peaceful to change in between sitting and standing as often times as you want throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a hefty home computer (or want to rest on it for some reason) it has you covered. It will likewise uniformly distribute weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is quite fundamental I tried to get as near to that as I might on uplifts site with equivalent setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is actually five inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation but as you need to know by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get doing not have even any cable grommets for travel through the outside carton
for the desktop was not harmed in any way which is absolutely strange due to the fact that I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply incredibly rough male if I had bought this I ‘d have been on the phone with customer service immediately they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function strangely absolutely where any kind of cable management products whatsoever the frame on this system is a single motor dual phase design versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded too to both the double stage dual motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this design does come standard with the control board that allows for up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a cost would be the one benefit I would provide this unit over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift model over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage design it still is available in a hundred and seventy dollars cheaper than the uplift however less expensive does not mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that but the lateral stability of this desk the horizontal movement at this price point it’s undesirable it’s add insult to injury here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is absolutely infuriating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here damaged as well my prepare for this desk at this moment is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furnishings that will last you this at best seems like a more affordable imitation of that it just doesn’t feel quality and the difference between this desk and my main desk is night and day do do not hesitate to take a look at their site as well which also feels eerily comparable to one of their rivals there’s a wealth of accessories you can get for the flexi area desk approximately and consisting of a foot massager and even a stationary exercise bike and I might spend another 10 minutes of our precious time covering various options and accessories I might however I think I’m better that they only sent a fundamental desk since as a fundamental desk I’m not a fan of the quality assurance at this price point and I don’t believe slapping on a lot of bonus is the relocation when the core item isn’t what it should be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot M Features
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of gaming and efficiency however I would invest the money it’s gon na take to enter into a greater end producer like uplift desk or extremely desk and I have not personally utilized really desk items so I can’t speak on it however their reputation is very good big thanks to flexi spot for sending this out for evaluation sadly I can not advise this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters showed up damaged however from a client perspective you ‘d probably be actually excited to get this in