today we’re taking a look at a motorized sit-stand desk…Flexispot M-series Standing Desk Converters… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was very positive.
It’s very easy to put together, and it took my 11-year-old child and I (I mainly simply supervised) under an hour from start to finish.
It’s incredibly durable and can hold a great deal of weight. Examine out the video listed below of it operating while there’s a person lying down on it if you do not think me.
The electrical raise/lower function is not just easy to use and quickly, however it’s likewise remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without offering it much thought.
On top of being practical, it also looks great in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also handy if your furry coworker likes to chew on or play with your cables.
Flexispot has choices that are much more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t necessarily a substantial fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is simply an effect of how tough the Flexispot is.
The practical cable television tray was a little bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will require to purchase an anti-fatigue mat to remain comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (since this meant it was going to be sturdy) and likewise a little hesitant (since we all understand just how much of a difficulty putting together furnishings can be).
Fortunately, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t described well in the guidelines.
Is it worth getting a standing desk?
When assembled, I enjoy the streamlined appearance of this desk. I’m confident any of the many varied surfaces that it can be found in would look great in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, effective, and quiet to change between sitting and standing as often times as you desire throughout the day.
Lastly, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop (or want to rest on it for some reason) it has you covered. It will likewise equally disperse weight no matter how unbalanced the weight you place on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is quite fundamental I tried to get as near to that as I might on uplifts site with equivalent setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is really five inches longer however you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you should know by now does not impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get lacking even any cable television grommets for pass through the outdoors container
for the desktop was not harmed in any way which is entirely bizarre because I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply extremely rough male if I had actually bought this I ‘d have been on the phone with customer service right away they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function strangely absolutely where any sort of cable management products whatsoever the frame on this unit is a single motor double phase design versus the double motor three-stage design that comes requirement with the uplift desk this can be updated also to both the dual stage dual motor and a three-stage double motor which presses the cost of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this model does come standard with the control board that permits up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a cost would be the one advantage I would give this system over the uplift desk and I wish to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift model over 35% more affordable even if you upgrade this flexi spot test to the dual motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift however less expensive does not suggest cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s add insult to injury here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is definitely frustrating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here damaged also my prepare for this desk at this point is to lose the desk top and featured all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furniture that will last you this at finest seems like a cheaper replica of that it simply does not feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to check out their website too which also feels strangely similar to among their competitors there’s a wealth of accessories you can get for the flexi area desk as much as and including a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our valuable time covering different options and accessories I might however I think I’m happier that they just sent a basic desk due to the fact that as a fundamental desk I’m not a fan of the quality control at this cost point and I do not believe slapping on a lot of additionals is the relocation when the core item isn’t what it should be they do use a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot M-series Standing Desk Converters
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of video gaming and productivity however I would spend the extra money it’s gon na take to enter a greater end producer like uplift desk or really desk and I haven’t personally used extremely desk products so I can’t speak on it but their credibility is excellent big thanks to flexi area for sending this out for review unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters showed up damaged however from a customer perspective you ‘d most likely be actually delighted to get this in