today we’re having a look at a motorized sit-stand desk…Flexispot M17B… you might have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was extremely favorable.
It’s really easy to put together, and it took my 11-year-old child and I (I primarily just monitored) under an hour from start to finish.
It’s extremely tough and can hold a lot of weight. If you do not believe me, check out the video below of it running while there’s a person resting on it.
The electric raise/lower function is not only easy to use and quickly, however it’s likewise remarkably smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much thought.
On top of being functional, it also looks excellent in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a monitor stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also handy if your furry coworker likes to chew on or have fun with your cables.
Flexispot has alternatives that are much more economical than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t always a big fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how tough the Flexispot is.
The hassle-free cable television tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will need to buy an anti-fatigue mat to remain comfortable, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (given that this meant it was going to be tough) and likewise a little reluctant (because we all understand just how much of a challenge putting together furnishings can be).
The good news is, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
When assembled, I love the sleek look of this desk. I’m confident any of the many varied finishes that it can be found in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and peaceful to change between sitting and standing as often times as you desire throughout the day.
Last but not least, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a large desktop (or want to rest on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is quite fundamental I tried to get as near that as I could on uplifts site with equivalent setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is really 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation but as you need to know by now doesn’t impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get lacking even any cable television grommets for pass through the outdoors container
for the desktop was not harmed in any way which is entirely unusual due to the fact that I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply very rough male if I had actually acquired this I ‘d have been on the phone with client service right away they did also managed to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function strangely absolutely where any sort of cable management materials whatsoever the frame on this system is a single motor dual stage design versus the dual motor three-stage design that comes standard with the uplift desk this can be upgraded too to both the double phase dual motor and a three-stage double motor which presses the expense of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this model does come basic with the control board that allows for up-and-down movement plus 3 memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a price would be the one benefit I would offer this unit over the uplift desk and I want to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% less expensive even if you upgrade this flexi area test to the dual motor three-stage design it still can be found in a hundred and seventy dollars cheaper than the uplift but more affordable doesn’t suggest inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely give it that but the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is definitely infuriating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived harmed as well my plan for this desk at this moment is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furniture that will last you this at best feels like a cheaper imitation of that it just doesn’t feel quality and the difference in between this desk and my main desk is night and day do feel free to have a look at their site also which likewise feels eerily comparable to one of their competitors there’s a wealth of accessories you can get for the flexi area desk approximately and including a foot massager and even a stationary stationary bicycle and I could spend another 10 minutes of our precious time covering various choices and devices I might however I think I’m happier that they just sent out a fundamental desk since as a fundamental desk I’m not a fan of the quality control at this rate point and I do not think slapping on a lot of extras is the move when the core item isn’t what it need to be they do use a 30-day trial if you’re just morbidly curious and they warranty their desks for three years really desk is five years and uplift desk is 7 years if you are Flexispot M17B
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and efficiency but I would invest the additional money it’s gon na require to enter into a higher end producer like uplift desk or very desk and I have not personally utilized really desk products so I can’t speak on it but their reputation is excellent big thanks to flexi spot for sending this out for evaluation unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with seeing as how both the desktop and the casters got here harmed but from a customer viewpoint you ‘d probably be truly thrilled to get this in