today we’re having a look at a motorized sit-stand desk…Flexispot M2 35″… you might have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was very favorable.
It’s very easy to assemble, and it took my 11-year-old child and I (I primarily simply supervised) under an hour from start to finish.
It’s super tough and can hold a lot of weight. Check out the video below of it running while there’s an individual lying down on it if you don’t believe me.
The electric raise/lower function is not only easy to use and fast, but it’s also remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without providing it much idea.
On top of being functional, it also looks excellent in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also practical if your furry colleague likes to chew on or have fun with your cables.
Flexispot has choices that are even more economical than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t always a big fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how durable the Flexispot is.
The convenient cable tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will require to purchase an anti-fatigue mat to stay comfy, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (because this implied it was going to be tough) and also a little reluctant (because all of us understand just how much of a challenge assembling furnishings can be).
Luckily, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t discussed well in the directions.
Is it worth getting a standing desk?
Once put together, I enjoy the sleek look of this desk. I’m positive any of the many diverse surfaces that it can be found in would look terrific in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, efficient, and peaceful to change between sitting and standing as often times as you desire throughout the day.
This desk is durable. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or wish to rest on it for some reason) it has you covered. It will also uniformly disperse weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is quite basic I attempted to get as close to that as I might on uplifts site with similar configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is actually five inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review but as you must understand by now does not affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get doing not have even any cable television grommets for go through the outdoors carton
for the desktop was not damaged in any way which is absolutely unusual because I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply extremely rough male if I had actually acquired this I ‘d have been on the phone with client service instantly they did also handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function unusually absolutely where any sort of cable television management materials whatsoever the frame on this system is a single motor double stage style versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated too to both the dual stage dual motor and a three-stage dual motor which presses the expense of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this design does come basic with the control board that allows for up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a price would be the one benefit I would give this unit over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift model over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage design it still can be found in a hundred and seventy dollars cheaper than the uplift however less expensive doesn’t suggest cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal movement at this cost point it’s inappropriate it’s add insult to injury here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is definitely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here damaged as well my prepare for this desk at this moment is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furniture that will last you this at best seems like a more affordable replica of that it just doesn’t feel quality and the distinction between this desk and my main desk is night and day do feel free to take a look at their website too which likewise feels eerily comparable to among their rivals there’s a wealth of devices you can get for the flexi spot desk approximately and consisting of a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our precious time covering various choices and accessories I could however I think I’m happier that they just sent a basic desk because as a basic desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a bunch of additionals is the relocation when the core product isn’t what it must be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years really desk is five years and uplift desk is 7 years if you are Flexispot M2 35″
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and efficiency but I would spend the money it’s gon na take to enter a greater end manufacturer like uplift desk or really desk and I have not personally used extremely desk items so I can’t speak on it however their credibility is excellent big thanks to flexi area for sending this out for review regrettably I can not recommend this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with seeing as how both the desktop and the casters got here damaged but from a consumer perspective you ‘d probably be actually delighted to get this in