today we’re taking a look at a motorized sit-stand desk…Flexispot M3B White… you may have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very positive.
It’s very easy to assemble, and it took my 11-year-old child and I (I primarily just supervised) under an hour from start to finish.
It’s super tough and can hold a great deal of weight. Check out the video below of it operating while there’s a person lying down on it if you do not believe me.
The electric raise/lower feature is not only easy to use and quick, however it’s also surprisingly smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much idea.
On top of being practical, it also looks terrific in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a screen stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also useful if your furry coworker likes to chew on or play with your cables.
Flexispot has options that are much more inexpensive than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t always a substantial fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how durable the Flexispot is.
The practical cable tray was a little bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the instructions.
You will need to buy an anti-fatigue mat to remain comfy, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (because this meant it was going to be strong) and likewise a little hesitant (since all of us know how much of a difficulty assembling furniture can be).
Luckily, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
When put together, I like the sleek look of this desk. I’m confident any of the many varied finishes that it can be found in would look excellent in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, effective, and quiet to change in between sitting and standing as many times as you want throughout the day.
Lastly, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a significant desktop (or want to take a nap on it for some reason) it has you covered. It will also uniformly distribute weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re taking a look at today is pretty standard I attempted to get as near that as I might on uplifts site with similar setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is actually five inches longer however you can do a lot with five inches boom yes now for openness flexi area did send this desk out for review however as you need to understand by now doesn’t affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get lacking even any cable grommets for go through the outdoors container
for the desktop was not harmed in any way which is utterly unusual because I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just incredibly rough guy if I had bought this I ‘d have been on the phone with customer service right away they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function unusually absolutely where any sort of cable television management products whatsoever the frame on this unit is a single motor double stage design versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded as well to both the double phase dual motor and a three-stage double motor which presses the cost of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this design does come standard with the control panel that allows for up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a rate would be the one advantage I would give this system over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift model over 35% cheaper even if you upgrade this flexi area test to the dual motor three-stage design it still comes in a hundred and seventy dollars less expensive than the uplift however less expensive does not mean inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely provide it that however the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is definitely frustrating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived damaged as well my prepare for this desk at this moment is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furnishings that will last you this at finest seems like a less expensive replica of that it simply does not feel quality and the difference between this desk and my main desk is night and day do feel free to check out their site also which likewise feels eerily similar to among their competitors there’s a wealth of devices you can get for the flexi area desk as much as and including a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our precious time covering various options and accessories I could but I think I’m better that they just sent a fundamental desk because as a basic desk I’m not a fan of the quality control at this price point and I don’t believe slapping on a bunch of extras is the move when the core product isn’t what it should be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years very desk is 5 years and uplift desk is 7 years if you are Flexispot M3B White
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and efficiency however I would invest the money it’s gon na require to get into a higher end maker like uplift desk or really desk and I have not personally utilized extremely desk items so I can’t speak on it but their credibility is excellent big thanks to flexi spot for sending this out for review sadly I can not advise this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with viewing as how both the desktop and the casters showed up harmed however from a customer viewpoint you ‘d probably be truly delighted to get this in