today we’re having a look at a motorized sit-stand desk…Flexispot M4B/M4W-41… you might have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was very favorable.
It’s extremely simple to assemble, and it took my 11-year-old child and I (I primarily just monitored) under an hour from start to finish.
It’s incredibly tough and can hold a lot of weight. If you don’t believe me, take a look at the video listed below of it running while there’s an individual resting on it.
The electric raise/lower feature is not only easy to use and fast, but it’s likewise remarkably smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without offering it much thought.
On top of being practical, it also looks terrific in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also helpful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has alternatives that are even more budget-friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t always a big fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, however this is just a consequence of how durable the Flexispot is.
The convenient cable television tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will require to purchase an anti-fatigue mat to remain comfy, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (considering that this suggested it was going to be durable) and also a little hesitant (since all of us understand how much of a challenge assembling furnishings can be).
Fortunately, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I love the smooth appearance of this desk. I’m confident any of the many varied surfaces that it comes in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, efficient, and peaceful to change in between sitting and standing as many times as you want throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a significant home computer (or wish to rest on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re taking a look at today is quite fundamental I tried to get as near to that as I might on uplifts site with comparable setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really 5 inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation however as you need to know by now doesn’t impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can potentially get lacking even any cable television grommets for travel through the outdoors container
for the desktop was not damaged in any way which is absolutely unusual because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply extremely rough male if I had purchased this I ‘d have been on the phone with customer support immediately they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function strangely absolutely where any sort of cable television management products whatsoever the frame on this system is a single motor dual stage design versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded also to both the double phase dual motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this model does come basic with the control panel that permits up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really quiet as in barely audible this outside a cost would be the one benefit I would provide this unit over the uplift desk and I want to take care here since this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% cheaper even if you upgrade this flexi area test to the dual motor three-stage style it still can be found in a hundred and seventy dollars cheaper than the uplift however more affordable doesn’t imply inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely provide it that but the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s add insult to injury here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the sound is definitely infuriating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here damaged also my plan for this desk at this moment is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furniture that will last you this at best seems like a less expensive replica of that it simply doesn’t feel quality and the distinction between this desk and my primary desk is night and day do feel free to take a look at their site too which likewise feels strangely similar to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and including a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our valuable time covering numerous alternatives and devices I could however I believe I’m happier that they just sent out a basic desk because as a fundamental desk I’m not a fan of the quality control at this cost point and I don’t believe slapping on a lot of extras is the relocation when the core item isn’t what it ought to be they do use a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years really desk is five years and uplift desk is 7 years if you are Flexispot M4B/M4W-41
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and performance but I would invest the additional money it’s gon na take to enter a higher end manufacturer like uplift desk or extremely desk and I have not personally utilized really desk items so I can’t speak on it however their reputation is very good big thanks to flexi area for sending this out for review regrettably I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with viewing as how both the desktop and the casters showed up damaged however from a client viewpoint you ‘d probably be really excited to get this in