today we’re having a look at a motorized sit-stand desk…Flexispot Ma8W… you may have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was really favorable.
It’s really easy to assemble, and it took my 11-year-old child and I (I primarily just monitored) under an hour from start to finish.
It’s extremely tough and can hold a great deal of weight. Examine out the video below of it operating while there’s a person lying down on it if you don’t think me.
The electrical raise/lower feature is not only easy to use and quickly, but it’s also surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without providing it much idea.
On top of being practical, it likewise looks great in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise handy if your furry colleague likes to chew on or play with your cables.
Flexispot has options that are much more budget-friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t necessarily a huge fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how durable the Flexispot is.
The practical cable television tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the directions.
You will require to buy an anti-fatigue mat to remain comfy, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (since this implied it was going to be tough) and likewise a little hesitant (because we all understand just how much of an obstacle assembling furnishings can be).
Thankfully, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t explained well in the instructions.
Is it worth getting a standing desk?
When assembled, I love the sleek appearance of this desk. I’m positive any of the many varied finishes that it comes in would look great in any office, and the adjustable width makes it easy to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it simple, effective, and peaceful to switch in between sitting and standing as sometimes as you want throughout the day.
Lastly, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a hefty home computer (or want to sleep on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
in that video is quite kitted out as the desk we’re taking a look at today is quite basic I attempted to get as close to that as I could on uplifts website with comparable setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is really five inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation but as you should understand by now doesn’t affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering up until completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get doing not have even any cable grommets for pass through the outdoors carton
for the desktop was not harmed in any way which is entirely bizarre since I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just super rough man if I had acquired this I ‘d have been on the phone with client service immediately they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function unusually absolutely where any sort of cable management products whatsoever the frame on this unit is a single motor dual phase style versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the double stage dual motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this model does come basic with the control board that allows for up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a rate would be the one benefit I would offer this system over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% less expensive even if you update this flexi spot test to the double motor three-stage style it still is available in a hundred and seventy dollars cheaper than the uplift but cheaper does not indicate low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s rub salt in the wound here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the sound is absolutely infuriating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters arrived harmed as well my plan for this desk at this moment is to lose the desk top and included all together and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furnishings that will last you this at finest feels like a more affordable imitation of that it simply doesn’t feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to have a look at their website also which likewise feels strangely similar to one of their rivals there’s a wealth of accessories you can get for the flexi area desk up to and consisting of a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our precious time covering different alternatives and accessories I could but I think I’m happier that they only sent a fundamental desk since as a fundamental desk I’m not a fan of the quality control at this cost point and I do not think slapping on a bunch of additionals is the move when the core item isn’t what it ought to be they do use a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years really desk is five years and uplift desk is seven years if you are Flexispot Ma8W
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and performance but I would invest the money it’s gon na require to enter a higher end maker like uplift desk or really desk and I have not personally utilized really desk products so I can’t speak on it but their track record is very good big thanks to flexi spot for sending this out for evaluation regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with viewing as how both the desktop and the casters got here harmed but from a client standpoint you ‘d most likely be actually delighted to get this in