today we’re taking a look at a motorized sit-stand desk…Flexispot Memory Setting… you might have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s really easy to assemble, and it took my 11-year-old child and I (I mostly just supervised) under an hour from start to finish.
It’s super sturdy and can hold a lot of weight. Check out the video below of it running while there’s an individual lying down on it if you do not believe me.
The electrical raise/lower function is not just easy to use and fast, but it’s likewise remarkably smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it easy to change in between the two without providing it much thought.
On top of being practical, it also looks fantastic in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a monitor stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise helpful if your furry coworker likes to chew on or play with your cables.
Flexispot has alternatives that are much more economical than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t always a huge fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is just a consequence of how sturdy the Flexispot is.
The hassle-free cable television tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will require to buy an anti-fatigue mat to stay comfortable, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (given that this indicated it was going to be strong) and also a little hesitant (because we all understand just how much of an obstacle putting together furnishings can be).
Fortunately, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I love the sleek look of this desk. I’m confident any of the many diverse surfaces that it comes in would look fantastic in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, effective, and peaceful to switch between sitting and standing as many times as you desire throughout the day.
This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or wish to take a nap on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is quite standard I tried to get as near to that as I could on uplifts website with equivalent setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is actually 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation but as you need to understand by now does not impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering up until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get doing not have even any cable grommets for travel through the outdoors container
for the desktop was not harmed in any way which is absolutely strange since I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just super rough guy if I had purchased this I ‘d have been on the phone with customer service right away they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function unusually definitely where any type of cable television management products whatsoever the frame on this unit is a single motor dual stage style versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded too to both the double phase dual motor and a three-stage double motor which presses the expense of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come standard with the control panel that permits up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is extremely quiet as in barely audible this outside a rate would be the one benefit I would provide this unit over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% less expensive even if you update this flexi area test to the double motor three-stage design it still is available in a hundred and seventy dollars cheaper than the uplift but cheaper does not suggest inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely give it that but the lateral stability of this desk the horizontal movement at this cost point it’s unacceptable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is definitely frustrating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived harmed as well my plan for this desk at this moment is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furnishings that will last you this at finest seems like a less expensive replica of that it just does not feel quality and the distinction in between this desk and my primary desk is night and day do do not hesitate to have a look at their site as well which likewise feels eerily comparable to one of their rivals there’s a wealth of devices you can get for the flexi spot desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our precious time covering various choices and accessories I could but I believe I’m happier that they only sent out a basic desk because as a basic desk I’m not a fan of the quality assurance at this price point and I don’t believe slapping on a bunch of extras is the relocation when the core item isn’t what it should be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years very desk is 5 years and uplift desk is seven years if you are Flexispot Memory Setting
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and productivity but I would spend the money it’s gon na require to enter a higher end maker like uplift desk or very desk and I have not personally used extremely desk products so I can’t speak on it however their credibility is very good big thanks to flexi spot for sending this out for review sadly I can not recommend this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with viewing as how both the desktop and the casters showed up harmed but from a customer perspective you ‘d most likely be really excited to get this in