today we’re having a look at a motorized sit-stand desk…Flexispot Mydealz… you might have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was extremely favorable.
It’s very easy to put together, and it took my 11-year-old daughter and I (I primarily simply supervised) under an hour from start to finish.
It’s extremely durable and can hold a great deal of weight. If you do not believe me, take a look at the video below of it operating while there’s an individual lying down on it.
The electric raise/lower function is not only easy to use and quickly, but it’s also surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without giving it much idea.
On top of being functional, it also looks fantastic in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is also valuable if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are even more cost effective than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a substantial fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how durable the Flexispot is.
The practical cable tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfortable, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (since this implied it was going to be tough) and also a little reluctant (since we all know just how much of an obstacle putting together furniture can be).
The good news is, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
Once put together, I enjoy the streamlined look of this desk. I’m confident any of the many diverse surfaces that it is available in would look excellent in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it simple, effective, and peaceful to switch in between sitting and standing as often times as you desire throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop computer (or want to take a nap on it for some reason) it has you covered. It will likewise equally disperse weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is pretty standard I tried to get as near that as I might on uplifts website with equivalent setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is in fact five inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review but as you should know by now doesn’t impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get lacking even any cable television grommets for pass through the outdoors carton
for the desktop was not damaged in any way which is entirely unusual since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just very rough man if I had bought this I ‘d have been on the phone with customer care instantly they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function unusually definitely where any type of cable management products whatsoever the frame on this system is a single motor dual stage design versus the double motor three-stage design that comes standard with the uplift desk this can be updated as well to both the dual phase double motor and a three-stage double motor which presses the expense of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this design does come standard with the control board that allows for up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a rate would be the one benefit I would give this unit over the uplift desk and I wish to be careful here since this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift model over 35% cheaper even if you update this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift however less expensive does not indicate cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is absolutely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here damaged also my prepare for this desk at this point is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furnishings that will last you this at best seems like a more affordable replica of that it simply doesn’t feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to have a look at their site also which likewise feels eerily similar to one of their competitors there’s a wealth of accessories you can get for the flexi area desk as much as and including a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our precious time covering various alternatives and devices I could but I think I’m happier that they just sent out a basic desk since as a basic desk I’m not a fan of the quality assurance at this price point and I do not believe slapping on a bunch of extras is the relocation when the core product isn’t what it need to be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years extremely desk is 5 years and uplift desk is seven years if you are Flexispot Mydealz
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and productivity but I would invest the extra money it’s gon na take to enter a higher end manufacturer like uplift desk or very desk and I haven’t personally used very desk items so I can’t speak on it but their track record is excellent big thanks to flexi spot for sending this out for evaluation regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with viewing as how both the desktop and the casters showed up harmed however from a customer perspective you ‘d probably be actually delighted to get this in