today we’re taking a look at a motorized sit-stand desk…Flexispot Netherlands… you may have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was extremely positive.
It’s extremely simple to assemble, and it took my 11-year-old daughter and I (I mostly simply supervised) under an hour from start to finish.
It’s very strong and can hold a great deal of weight. Inspect out the video listed below of it operating while there’s an individual lying down on it if you don’t believe me.
The electrical raise/lower function is not just easy to use and quickly, but it’s also surprisingly smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without giving it much thought.
On top of being practical, it likewise looks fantastic in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a monitor stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise useful if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has choices that are far more cost effective than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t necessarily a huge fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, however this is just a consequence of how sturdy the Flexispot is.
The convenient cable television tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will need to purchase an anti-fatigue mat to stay comfy, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (because this meant it was going to be sturdy) and also a little hesitant (since we all understand how much of a challenge putting together furnishings can be).
Thankfully, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t explained well in the directions.
Is it worth getting a standing desk?
Once assembled, I love the sleek appearance of this desk. I’m confident any of the many varied surfaces that it comes in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it easy, effective, and quiet to switch between sitting and standing as many times as you desire throughout the day.
This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop computer (or want to take a nap on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.
because video is quite kitted out as the desk we’re taking a look at today is quite standard I attempted to get as close to that as I might on uplifts website with similar configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is really 5 inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation however as you need to know by now doesn’t impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can possibly get doing not have even any cable grommets for travel through the outside container
for the desktop was not damaged in any way which is absolutely bizarre due to the fact that I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply incredibly rough guy if I had actually purchased this I ‘d have been on the phone with customer service immediately they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function strangely definitely where any type of cable management materials whatsoever the frame on this unit is a single motor double phase style versus the double motor three-stage style that comes standard with the uplift desk this can be updated as well to both the dual stage dual motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this model does come standard with the control panel that permits up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is extremely quiet as in barely audible this outside a price would be the one benefit I would offer this unit over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% cheaper even if you upgrade this flexi area test to the dual motor three-stage design it still comes in a hundred and seventy dollars more affordable than the uplift but more affordable doesn’t indicate cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that but the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s add fuel to the fire here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is absolutely shocking to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up harmed also my plan for this desk at this point is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furnishings that will last you this at finest seems like a less expensive imitation of that it simply doesn’t feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to check out their website too which also feels eerily comparable to among their rivals there’s a wealth of devices you can get for the flexi area desk up to and consisting of a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our precious time covering numerous choices and accessories I could but I think I’m better that they just sent out a basic desk since as a standard desk I’m not a fan of the quality assurance at this price point and I do not believe slapping on a bunch of bonus is the move when the core item isn’t what it should be they do use a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years really desk is 5 years and uplift desk is seven years if you are Flexispot Netherlands
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and productivity but I would invest the additional money it’s gon na take to get into a greater end manufacturer like uplift desk or very desk and I have not personally used very desk items so I can’t speak on it but their track record is excellent huge thanks to flexi spot for sending this out for review regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters got here damaged however from a consumer standpoint you ‘d most likely be actually thrilled to get this in