today we’re having a look at a motorized sit-stand desk…Flexispot Pro E6… you might have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was really positive.
It’s very simple to assemble, and it took my 11-year-old child and I (I primarily just supervised) under an hour from start to finish.
It’s very tough and can hold a great deal of weight. Check out the video below of it operating while there’s a person lying down on it if you don’t believe me.
The electric raise/lower function is not just easy to use and quick, however it’s also surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much thought.
On top of being functional, it also looks excellent in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a monitor stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise valuable if your furry colleague likes to chew on or have fun with your cables.
Flexispot has choices that are far more affordable than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t always a big fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how strong the Flexispot is.
The convenient cable television tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the guidelines.
You will require to buy an anti-fatigue mat to stay comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (given that this meant it was going to be durable) and also a little hesitant (since all of us understand how much of a challenge putting together furniture can be).
Thankfully, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
When put together, I love the smooth appearance of this desk. I’m positive any of the many diverse surfaces that it can be found in would look fantastic in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, efficient, and peaceful to switch between sitting and standing as sometimes as you want throughout the day.
Finally, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop computer (or want to sleep on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is pretty fundamental I attempted to get as close to that as I might on uplifts site with comparable setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is actually 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation however as you need to understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can potentially get doing not have even any cable grommets for travel through the outside container
for the desktop was not harmed in any way which is utterly strange because I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply very rough man if I had acquired this I ‘d have been on the phone with client service instantly they did also handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function strangely definitely where any type of cable television management materials whatsoever the frame on this unit is a single motor dual phase design versus the dual motor three-stage design that comes standard with the uplift desk this can be updated too to both the dual stage dual motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this design does come basic with the control panel that permits up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a price would be the one advantage I would give this unit over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift model over 35% more affordable even if you update this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift but less expensive does not suggest cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is definitely frustrating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up harmed also my prepare for this desk at this point is to lose the desk top and featured all together and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furniture that will last you this at finest feels like a less expensive imitation of that it just doesn’t feel quality and the difference in between this desk and my primary desk is night and day do feel free to have a look at their website too which likewise feels strangely similar to among their rivals there’s a wealth of devices you can get for the flexi area desk approximately and including a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our precious time covering various choices and devices I might but I think I’m happier that they only sent out a standard desk because as a basic desk I’m not a fan of the quality control at this price point and I don’t believe slapping on a lot of bonus is the move when the core item isn’t what it should be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years really desk is 5 years and uplift desk is 7 years if you are Flexispot Pro E6
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and productivity but I would invest the money it’s gon na take to enter into a higher end manufacturer like uplift desk or extremely desk and I haven’t personally utilized extremely desk products so I can’t speak on it however their track record is excellent big thanks to flexi area for sending this out for review sadly I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with viewing as how both the desktop and the casters showed up harmed however from a client viewpoint you ‘d most likely be really thrilled to get this in