Find Flexispot Pro Series Desk 2022

today we’re having a look at a motorized sit-stand desk…Flexispot Pro Series Desk… you might have seen my review on the uplift desk, if not …

In general, I should state I like the Flexispot E7.

here are plenty of things to love about the Flexispot E7. In general, my experience was really favorable.

It’s extremely easy to put together, and it took my 11-year-old child and I (I mostly simply supervised) under an hour from start to finish.
It’s incredibly tough and can hold a lot of weight. Inspect out the video listed below of it operating while there’s a person lying down on it if you don’t think me.

The electrical raise/lower feature is not just easy to use and quickly, however it’s likewise remarkably smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without offering it much thought.
On top of being functional, it also looks great in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also useful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has options that are far more inexpensive than numerous other desks like it.
Flexispot Standing Desk Review – Cons

Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t necessarily a substantial fan of:

The plan that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply an effect of how strong the Flexispot is.
The hassle-free cable television tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfy, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.

When it arrived and I saw how heavy it was, I was both ecstatic (because this meant it was going to be tough) and also a little hesitant (because all of us understand how much of a challenge assembling furnishings can be).

The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t described well in the directions.

Once assembled, I like the sleek look of this desk. I’m positive any of the many varied finishes that it can be found in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.

The peaceful operation and height memory settings make it easy, effective, and quiet to switch in between sitting and standing as lot of times as you desire throughout the day.

This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop (or wish to rest on it for some reason) it has you covered. It will likewise equally distribute weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.

 

in that video is pretty kitted out as the desk we’re looking at today is pretty standard I tried to get as close to that as I might on uplifts site with equivalent setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation but as you should understand by now does not affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can perhaps get doing not have even any cable television grommets for travel through the outside carton

for the desktop was not damaged in any way which is entirely unusual due to the fact that I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply very rough guy if I had acquired this I ‘d have been on the phone with customer service immediately they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function strangely absolutely where any kind of cable television management products whatsoever the frame on this unit is a single motor dual stage design versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded also to both the double stage dual motor and a three-stage dual motor which pushes the cost of the desk up

an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this model does come basic with the control board that allows for up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be slow is really peaceful as in barely audible this outside a cost would be the one benefit I would provide this system over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% more affordable even if you upgrade this flexi spot test to the dual motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift but cheaper doesn’t imply cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s rub salt in the wound here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when

this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is definitely infuriating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters showed up harmed as well my plan for this desk at this moment is to lose the desk top and included all together and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furnishings that will last you this at finest feels like a less expensive imitation of that it just does not feel quality and the difference in between this desk and my primary desk is night and day do feel free to take a look at their site also which likewise feels eerily similar to one of their rivals there’s a wealth of devices you can get for the flexi spot desk up to and consisting of a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our precious time covering different alternatives and accessories I might but I think I’m happier that they just sent out a standard desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this rate point and I don’t think slapping on a bunch of bonus is the move when the core item isn’t what it ought to be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years very desk is 5 years and uplift desk is seven years if you are Flexispot Pro Series Desk

in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of video gaming and productivity but I would invest the additional money it’s gon na take to enter into a higher end producer like uplift desk or really desk and I have not personally used extremely desk items so I can’t speak on it however their reputation is very good big thanks to flexi spot for sending this out for review regrettably I can not advise this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with seeing as how both the desktop and the casters arrived damaged but from a customer viewpoint you ‘d probably be really excited to get this in

Published