today we’re having a look at a motorized sit-stand desk…Flexispot Pro Series… you might have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was really positive.
It’s very simple to assemble, and it took my 11-year-old daughter and I (I primarily simply supervised) under an hour from start to finish.
It’s super tough and can hold a lot of weight. Check out the video below of it operating while there’s an individual lying down on it if you don’t think me.
The electrical raise/lower feature is not only easy to use and quick, however it’s also remarkably smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without giving it much idea.
On top of being functional, it likewise looks terrific in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a screen stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is likewise handy if your furry colleague likes to chew on or have fun with your cables.
Flexispot has options that are far more affordable than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t always a big fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, but this is just an effect of how strong the Flexispot is.
The hassle-free cable television tray was a little bit confusing to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will require to buy an anti-fatigue mat to stay comfortable, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (since this implied it was going to be tough) and likewise a little hesitant (due to the fact that all of us know just how much of a difficulty putting together furniture can be).
The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
Once assembled, I enjoy the sleek look of this desk. I’m positive any of the many varied surfaces that it comes in would look great in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, effective, and quiet to switch in between sitting and standing as often times as you desire throughout the day.
Finally, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or wish to take a nap on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is quite fundamental I tried to get as near to that as I might on uplifts website with equivalent setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is really 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation but as you should know by now doesn’t affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get lacking even any cable television grommets for travel through the outdoors carton
for the desktop was not harmed in any way which is absolutely strange because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just extremely rough male if I had purchased this I ‘d have been on the phone with customer support right away they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function strangely definitely where any type of cable television management products whatsoever the frame on this system is a single motor dual stage design versus the dual motor three-stage design that comes standard with the uplift desk this can be updated as well to both the dual phase double motor and a three-stage dual motor which presses the expense of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this model does come standard with the control board that enables up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a price would be the one advantage I would provide this unit over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% less expensive even if you upgrade this flexi area test to the dual motor three-stage design it still can be found in a hundred and seventy dollars less expensive than the uplift but cheaper doesn’t imply low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely offer it that but the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s add fuel to the fire here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the noise and this baffle is definitely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up harmed also my plan for this desk at this point is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furniture that will last you this at finest seems like a cheaper imitation of that it simply does not feel quality and the distinction in between this desk and my main desk is night and day do feel free to check out their website also which likewise feels strangely comparable to among their competitors there’s a wealth of accessories you can get for the flexi area desk up to and including a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our precious time covering different choices and devices I might but I believe I’m better that they just sent out a basic desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a bunch of additionals is the relocation when the core item isn’t what it need to be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years very desk is 5 years and uplift desk is seven years if you are Flexispot Pro Series
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and efficiency however I would invest the extra money it’s gon na require to get into a higher end producer like uplift desk or really desk and I have not personally used very desk items so I can’t speak on it but their credibility is great huge thanks to flexi area for sending this out for evaluation unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with seeing as how both the desktop and the casters got here harmed but from a consumer viewpoint you ‘d most likely be really delighted to get this in