today we’re taking a look at a motorized sit-stand desk…Flexispot Riser Desk… you might have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely easy to put together, and it took my 11-year-old child and I (I mainly just supervised) under an hour from start to finish.
It’s very strong and can hold a lot of weight. If you do not think me, check out the video below of it running while there’s a person lying down on it.
The electric raise/lower function is not only easy to use and fast, however it’s likewise remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to switch between the two without providing it much idea.
On top of being practical, it also looks fantastic in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a screen stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also handy if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has choices that are far more affordable than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t always a big fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how durable the Flexispot is.
The hassle-free cable television tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (given that this implied it was going to be tough) and also a little hesitant (because we all know how much of an obstacle putting together furniture can be).
Thankfully, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the streamlined appearance of this desk. I’m confident any of the many varied finishes that it is available in would look great in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it simple, effective, and quiet to switch in between sitting and standing as often times as you desire throughout the day.
Lastly, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a substantial home computer (or want to rest on it for some reason) it has you covered. It will also evenly disperse weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re looking at today is quite standard I attempted to get as close to that as I could on uplifts site with equivalent setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is actually 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review however as you need to know by now does not impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get lacking even any cable grommets for travel through the outside carton
for the desktop was not harmed in any way which is utterly unusual since I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just very rough man if I had bought this I ‘d have been on the phone with client service immediately they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function strangely definitely where any type of cable management products whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded as well to both the double phase double motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this model does come basic with the control board that allows for up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a price would be the one benefit I would provide this system over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% cheaper even if you update this flexi spot test to the double motor three-stage design it still comes in a hundred and seventy dollars less expensive than the uplift however more affordable doesn’t suggest inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely offer it that but the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s add fuel to the fire here they include a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is definitely frustrating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up harmed also my prepare for this desk at this point is to lose the desk top and featured all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furniture that will last you this at finest feels like a less expensive imitation of that it just doesn’t feel quality and the distinction in between this desk and my main desk is night and day do feel free to take a look at their site as well which likewise feels eerily similar to among their rivals there’s a wealth of devices you can get for the flexi area desk approximately and consisting of a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our precious time covering various choices and accessories I could however I think I’m happier that they just sent out a fundamental desk due to the fact that as a standard desk I’m not a fan of the quality control at this cost point and I don’t think slapping on a bunch of additionals is the relocation when the core item isn’t what it must be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years very desk is five years and uplift desk is 7 years if you are Flexispot Riser Desk
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and efficiency however I would spend the extra money it’s gon na take to get into a higher end manufacturer like uplift desk or extremely desk and I haven’t personally utilized very desk products so I can’t speak on it however their reputation is great huge thanks to flexi spot for sending this out for evaluation sadly I can not advise this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters arrived damaged however from a client viewpoint you ‘d most likely be really excited to get this in