today we’re taking a look at a motorized sit-stand desk…Flexispot Scam… you may have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was extremely positive.
It’s really simple to assemble, and it took my 11-year-old daughter and I (I mainly simply monitored) under an hour from start to finish.
It’s incredibly tough and can hold a lot of weight. If you don’t believe me, check out the video listed below of it running while there’s a person resting on it.
The electrical raise/lower function is not just easy to use and quickly, however it’s likewise remarkably smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without offering it much idea.
On top of being functional, it also looks great in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a monitor stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise helpful if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are much more budget friendly than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a huge fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how durable the Flexispot is.
The hassle-free cable television tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the instructions.
You will require to purchase an anti-fatigue mat to stay comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (because this indicated it was going to be durable) and likewise a little reluctant (since we all know just how much of a challenge putting together furnishings can be).
The good news is, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
Once put together, I enjoy the sleek appearance of this desk. I’m positive any of the many varied finishes that it comes in would look terrific in any office, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, efficient, and quiet to switch between sitting and standing as often times as you desire throughout the day.
Last but not least, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop computer (or wish to take a nap on it for some reason) it has you covered. It will also evenly distribute weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is pretty fundamental I tried to get as near to that as I might on uplifts site with similar setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is in fact 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review however as you ought to know by now does not affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get doing not have even any cable television grommets for go through the outside container
for the desktop was not damaged in any way which is utterly bizarre due to the fact that I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply incredibly rough man if I had actually purchased this I ‘d have been on the phone with client service immediately they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function strangely definitely where any kind of cable management products whatsoever the frame on this system is a single motor double phase design versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated also to both the double phase double motor and a three-stage double motor which presses the expense of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come standard with the control board that enables up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a rate would be the one advantage I would give this system over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift design over 35% less expensive even if you update this flexi area test to the dual motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift however less expensive does not imply low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the noise and this baffle is absolutely frustrating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up harmed too my plan for this desk at this point is to lose the desk top and featured completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to movie items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furniture that will last you this at finest feels like a cheaper imitation of that it just doesn’t feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to have a look at their site as well which likewise feels eerily comparable to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk approximately and consisting of a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our precious time covering different choices and accessories I could however I believe I’m happier that they only sent out a basic desk due to the fact that as a standard desk I’m not a fan of the quality control at this cost point and I do not think slapping on a bunch of bonus is the relocation when the core item isn’t what it need to be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years extremely desk is five years and uplift desk is seven years if you are Flexispot Scam
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of video gaming and efficiency however I would invest the extra money it’s gon na require to enter a higher end maker like uplift desk or very desk and I have not personally utilized extremely desk products so I can’t speak on it but their reputation is great huge thanks to flexi area for sending this out for review sadly I can not advise this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with seeing as how both the desktop and the casters showed up harmed however from a client perspective you ‘d most likely be actually excited to get this in