today we’re having a look at a motorized sit-stand desk…Flexispot Schreibtisch Gestell… you may have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was really favorable.
It’s really easy to put together, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s extremely tough and can hold a great deal of weight. Check out the video below of it running while there’s a person lying down on it if you don’t think me.
The electrical raise/lower function is not just easy to use and fast, but it’s also remarkably smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to change in between the two without providing it much idea.
On top of being practical, it also looks great in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a monitor stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also useful if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has options that are much more cost effective than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t always a big fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just an effect of how tough the Flexispot is.
The convenient cable tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will need to purchase an anti-fatigue mat to stay comfortable, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (given that this indicated it was going to be sturdy) and also a little hesitant (since all of us know just how much of an obstacle putting together furnishings can be).
Luckily, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t described well in the guidelines.
Is it worth getting a standing desk?
When put together, I enjoy the smooth appearance of this desk. I’m confident any of the many varied surfaces that it comes in would look great in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, efficient, and quiet to change in between sitting and standing as often times as you want throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a large home computer (or want to take a nap on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.
in that video is quite kitted out as the desk we’re taking a look at today is quite fundamental I attempted to get as near to that as I could on uplifts site with equivalent configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is actually five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation but as you ought to know by now doesn’t impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get lacking even any cable grommets for pass through the outdoors container
for the desktop was not damaged in any way which is entirely bizarre because I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just extremely rough man if I had bought this I ‘d have been on the phone with customer support instantly they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function unusually definitely where any type of cable television management materials whatsoever the frame on this unit is a single motor dual stage style versus the double motor three-stage style that comes standard with the uplift desk this can be updated too to both the double phase double motor and a three-stage double motor which presses the expense of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come basic with the control panel that allows for up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a cost would be the one benefit I would offer this system over the uplift desk and I wish to be careful here since this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage design it still comes in a hundred and seventy dollars cheaper than the uplift however cheaper does not mean cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely give it that but the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s add insult to injury here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is definitely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up harmed as well my prepare for this desk at this point is to lose the desk top and came with all together and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furnishings that will last you this at best seems like a more affordable replica of that it simply does not feel quality and the difference between this desk and my primary desk is night and day do feel free to take a look at their website too which likewise feels strangely similar to one of their rivals there’s a wealth of devices you can get for the flexi area desk approximately and consisting of a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our precious time covering different options and accessories I might but I think I’m better that they just sent out a fundamental desk since as a standard desk I’m not a fan of the quality assurance at this rate point and I don’t believe slapping on a lot of additionals is the move when the core product isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years extremely desk is five years and uplift desk is 7 years if you are Flexispot Schreibtisch Gestell
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and productivity but I would spend the additional money it’s gon na require to get into a higher end producer like uplift desk or very desk and I have not personally used extremely desk items so I can’t speak on it however their track record is very good huge thanks to flexi spot for sending this out for evaluation sadly I can not advise this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with viewing as how both the desktop and the casters arrived harmed but from a customer standpoint you ‘d probably be truly delighted to get this in