today we’re taking a look at a motorized sit-stand desk…Flexispot Schreibtisch Gestelle… you might have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very positive.
It’s really easy to assemble, and it took my 11-year-old daughter and I (I mainly just supervised) under an hour from start to finish.
It’s very tough and can hold a lot of weight. If you don’t think me, take a look at the video listed below of it running while there’s an individual lying down on it.
The electrical raise/lower function is not just easy to use and quick, however it’s likewise remarkably smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to change in between the two without giving it much thought.
On top of being practical, it also looks great in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise handy if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has choices that are far more affordable than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a big fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is just an effect of how strong the Flexispot is.
The hassle-free cable television tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfortable, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (considering that this indicated it was going to be sturdy) and also a little reluctant (due to the fact that we all understand how much of an obstacle putting together furniture can be).
Luckily, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the guidelines.
Is it worth getting a standing desk?
As soon as assembled, I love the smooth look of this desk. I’m confident any of the many varied finishes that it can be found in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it easy, effective, and peaceful to switch in between sitting and standing as often times as you desire throughout the day.
This desk is tough. It can hold up to 335 pounds even while in operation, so if you have a significant home computer (or wish to sleep on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how unbalanced the weight you put on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is quite standard I attempted to get as close to that as I could on uplifts website with similar configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is in fact five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you need to understand by now doesn’t impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can perhaps get doing not have even any cable television grommets for go through the outside carton
for the desktop was not damaged in any way which is utterly strange because I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply extremely rough male if I had bought this I ‘d have been on the phone with client service immediately they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function unusually definitely where any kind of cable television management materials whatsoever the frame on this unit is a single motor double stage design versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the double stage dual motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this model does come basic with the control panel that allows for up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a rate would be the one benefit I would provide this system over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift model over 35% more affordable even if you update this flexi spot test to the dual motor three-stage design it still comes in a hundred and seventy dollars more affordable than the uplift however more affordable doesn’t indicate cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is absolutely shocking to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters showed up damaged also my plan for this desk at this moment is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furniture that will last you this at best seems like a cheaper replica of that it just does not feel quality and the difference in between this desk and my primary desk is night and day do feel free to check out their website as well which also feels strangely similar to among their rivals there’s a wealth of devices you can get for the flexi spot desk up to and consisting of a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our precious time covering different alternatives and accessories I might however I believe I’m better that they only sent a fundamental desk since as a basic desk I’m not a fan of the quality control at this price point and I do not believe slapping on a lot of bonus is the relocation when the core product isn’t what it should be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years extremely desk is 5 years and uplift desk is seven years if you are Flexispot Schreibtisch Gestelle
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and performance but I would spend the additional money it’s gon na require to enter a higher end producer like uplift desk or very desk and I haven’t personally used extremely desk products so I can’t speak on it but their track record is very good big thanks to flexi area for sending this out for review sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with seeing as how both the desktop and the casters showed up harmed but from a client viewpoint you ‘d probably be actually delighted to get this in