today we’re having a look at a motorized sit-stand desk…Flexispot Scrivania… you may have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely simple to assemble, and it took my 11-year-old child and I (I mainly just supervised) under an hour from start to finish.
It’s super tough and can hold a lot of weight. If you do not believe me, check out the video listed below of it running while there’s a person lying down on it.
The electric raise/lower feature is not only easy to use and fast, however it’s also remarkably smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without providing it much thought.
On top of being functional, it also looks terrific in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a monitor stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also handy if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has choices that are even more budget friendly than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t always a substantial fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how strong the Flexispot is.
The practical cable television tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the guidelines.
You will need to purchase an anti-fatigue mat to remain comfortable, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (considering that this meant it was going to be sturdy) and likewise a little reluctant (due to the fact that we all know just how much of an obstacle assembling furniture can be).
Fortunately, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the directions.
Is it worth getting a standing desk?
Once assembled, I enjoy the streamlined appearance of this desk. I’m confident any of the many diverse surfaces that it is available in would look great in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, effective, and peaceful to change in between sitting and standing as often times as you want throughout the day.
This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a hefty home computer (or wish to rest on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
in that video is quite kitted out as the desk we’re looking at today is quite basic I tried to get as near that as I might on uplifts website with equivalent configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is actually 5 inches longer but you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review but as you should know by now doesn’t impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get lacking even any cable grommets for go through the outdoors container
for the desktop was not harmed in any way which is absolutely bizarre because I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just very rough man if I had actually purchased this I ‘d have been on the phone with client service immediately they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function strangely absolutely where any kind of cable television management products whatsoever the frame on this system is a single motor dual phase style versus the dual motor three-stage design that comes standard with the uplift desk this can be updated too to both the dual stage dual motor and a three-stage double motor which presses the cost of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this model does come standard with the control board that permits up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really peaceful as in barely audible this outside a cost would be the one benefit I would provide this system over the uplift desk and I want to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift however less expensive does not imply inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the noise and this baffle is definitely frustrating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here damaged also my prepare for this desk at this moment is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furnishings that will last you this at finest seems like a cheaper replica of that it simply does not feel quality and the distinction in between this desk and my primary desk is night and day do feel free to check out their site as well which also feels strangely similar to among their rivals there’s a wealth of devices you can get for the flexi area desk as much as and including a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our precious time covering various choices and accessories I could but I believe I’m happier that they only sent out a standard desk since as a basic desk I’m not a fan of the quality assurance at this rate point and I don’t think slapping on a bunch of additionals is the relocation when the core product isn’t what it need to be they do use a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years extremely desk is five years and uplift desk is seven years if you are Flexispot Scrivania
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and performance but I would invest the additional money it’s gon na take to enter a greater end producer like uplift desk or very desk and I haven’t personally utilized extremely desk items so I can’t speak on it however their track record is excellent huge thanks to flexi area for sending this out for evaluation regrettably I can not suggest this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with viewing as how both the desktop and the casters arrived harmed however from a consumer viewpoint you ‘d probably be really delighted to get this in