today we’re taking a look at a motorized sit-stand desk…Flexispot Sit And Move… you may have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was really favorable.
It’s very easy to put together, and it took my 11-year-old daughter and I (I mainly simply monitored) under an hour from start to finish.
It’s super durable and can hold a lot of weight. Inspect out the video below of it running while there’s an individual lying down on it if you do not believe me.
The electrical raise/lower feature is not only easy to use and quickly, but it’s also remarkably smooth and quiet.
You can program your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without giving it much thought.
On top of being practical, it likewise looks fantastic in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also helpful if your furry coworker likes to chew on or have fun with your cables.
Flexispot has alternatives that are much more economical than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t necessarily a huge fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, but this is just a consequence of how tough the Flexispot is.
The convenient cable television tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will need to buy an anti-fatigue mat to remain comfy, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (given that this suggested it was going to be strong) and likewise a little hesitant (due to the fact that we all understand how much of an obstacle putting together furniture can be).
Luckily, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the directions.
Is it worth getting a standing desk?
When assembled, I enjoy the smooth appearance of this desk. I’m positive any of the many diverse finishes that it comes in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, effective, and quiet to switch in between sitting and standing as often times as you desire throughout the day.
Lastly, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or want to rest on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is quite basic I tried to get as near to that as I might on uplifts site with similar configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really five inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for evaluation but as you ought to know by now doesn’t impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get doing not have even any cable grommets for go through the outside carton
for the desktop was not harmed in any way which is entirely bizarre since I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just very rough man if I had bought this I ‘d have been on the phone with customer care right away they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function unusually definitely where any kind of cable management materials whatsoever the frame on this unit is a single motor double stage style versus the dual motor three-stage design that comes standard with the uplift desk this can be updated as well to both the dual stage double motor and a three-stage double motor which presses the cost of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this design does come basic with the control panel that permits up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a rate would be the one advantage I would provide this unit over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% cheaper even if you update this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift however cheaper does not suggest cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that however the lateral stability of this desk the horizontal movement at this cost point it’s unacceptable it’s rub salt in the wound here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is definitely shocking to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here harmed too my plan for this desk at this point is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality office furniture that will last you this at finest seems like a more affordable imitation of that it just does not feel quality and the difference between this desk and my primary desk is night and day do feel free to have a look at their website too which likewise feels strangely comparable to among their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and including a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our valuable time covering various alternatives and devices I might but I believe I’m better that they only sent a basic desk due to the fact that as a standard desk I’m not a fan of the quality control at this price point and I do not believe slapping on a lot of additionals is the relocation when the core item isn’t what it need to be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years really desk is 5 years and uplift desk is 7 years if you are Flexispot Sit And Move
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and efficiency however I would spend the additional money it’s gon na take to enter a greater end manufacturer like uplift desk or very desk and I have not personally utilized very desk products so I can’t speak on it but their reputation is excellent huge thanks to flexi spot for sending this out for review unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with seeing as how both the desktop and the casters arrived harmed however from a customer viewpoint you ‘d most likely be actually excited to get this in