today we’re having a look at a motorized sit-stand desk…Flexispot Sit Stand Desk… you might have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s very easy to assemble, and it took my 11-year-old daughter and I (I mainly just supervised) under an hour from start to finish.
It’s super sturdy and can hold a lot of weight. Inspect out the video listed below of it operating while there’s a person lying down on it if you do not think me.
The electric raise/lower function is not only easy to use and fast, however it’s also remarkably smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without giving it much thought.
On top of being functional, it also looks terrific in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a screen stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is likewise valuable if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has choices that are far more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t always a substantial fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how durable the Flexispot is.
The hassle-free cable television tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the instructions.
You will require to buy an anti-fatigue mat to remain comfy, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (since this suggested it was going to be sturdy) and likewise a little hesitant (because we all understand just how much of an obstacle assembling furniture can be).
The good news is, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
Once put together, I like the streamlined look of this desk. I’m positive any of the many varied finishes that it can be found in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, efficient, and quiet to change in between sitting and standing as often times as you desire throughout the day.
Finally, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a large desktop (or wish to sleep on it for some reason) it has you covered. It will likewise equally distribute weight no matter how unbalanced the weight you put on it is, it will not wobble or wiggle.
because video is pretty kitted out as the desk we’re looking at today is quite basic I attempted to get as near that as I might on uplifts website with comparable setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is actually 5 inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation however as you should understand by now does not impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can perhaps get lacking even any cable grommets for pass through the outside carton
for the desktop was not harmed in any way which is utterly bizarre due to the fact that I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply extremely rough guy if I had actually acquired this I ‘d have been on the phone with customer support instantly they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function unusually absolutely where any kind of cable television management products whatsoever the frame on this unit is a single motor dual stage design versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded as well to both the double phase double motor and a three-stage double motor which presses the expense of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this design does come basic with the control board that enables up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a rate would be the one advantage I would give this unit over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% less expensive even if you update this flexi spot test to the dual motor three-stage design it still can be found in a hundred and seventy dollars less expensive than the uplift however cheaper does not imply low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal movement at this rate point it’s inappropriate it’s add fuel to the fire here they consist of a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the noise and this baffle is definitely shocking to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here harmed as well my plan for this desk at this point is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality office furnishings that will last you this at best feels like a less expensive replica of that it simply does not feel quality and the distinction between this desk and my main desk is night and day do feel free to have a look at their website too which likewise feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi area desk up to and consisting of a foot massager and even a stationary stationary bicycle and I could spend another 10 minutes of our precious time covering various options and devices I might however I believe I’m better that they only sent out a basic desk since as a standard desk I’m not a fan of the quality assurance at this cost point and I do not believe slapping on a bunch of extras is the relocation when the core product isn’t what it ought to be they do use a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years very desk is 5 years and uplift desk is seven years if you are Flexispot Sit Stand Desk
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and efficiency but I would invest the extra money it’s gon na take to get into a greater end producer like uplift desk or very desk and I haven’t personally utilized extremely desk items so I can’t speak on it however their track record is great big thanks to flexi spot for sending this out for evaluation sadly I can not advise this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with viewing as how both the desktop and the casters showed up harmed however from a client standpoint you ‘d most likely be really delighted to get this in