today we’re taking a look at a motorized sit-stand desk…Flexispot Soutien… you may have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s very easy to assemble, and it took my 11-year-old child and I (I primarily simply supervised) under an hour from start to finish.
It’s extremely sturdy and can hold a great deal of weight. Check out the video below of it running while there’s an individual lying down on it if you do not think me.
The electric raise/lower function is not just easy to use and quick, however it’s also remarkably smooth and quiet.
You can program your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without providing it much thought.
On top of being functional, it likewise looks fantastic in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is also practical if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are even more affordable than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of features that I wasn’t always a huge fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how tough the Flexispot is.
The hassle-free cable tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the instructions.
You will need to buy an anti-fatigue mat to stay comfy, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (given that this implied it was going to be tough) and likewise a little hesitant (due to the fact that all of us understand just how much of a difficulty putting together furnishings can be).
The good news is, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
When assembled, I love the streamlined appearance of this desk. I’m confident any of the many diverse finishes that it is available in would look terrific in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, efficient, and quiet to switch between sitting and standing as many times as you desire throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop computer (or want to rest on it for some reason) it has you covered. It will likewise uniformly distribute weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is quite basic I tried to get as close to that as I could on uplifts website with comparable setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is in fact 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you must understand by now does not impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get lacking even any cable grommets for travel through the outside carton
for the desktop was not harmed in any way which is utterly bizarre since I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just super rough guy if I had actually bought this I ‘d have been on the phone with client service right away they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function strangely absolutely where any type of cable management products whatsoever the frame on this unit is a single motor double phase design versus the dual motor three-stage style that comes standard with the uplift desk this can be updated too to both the double phase dual motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this design does come standard with the control panel that allows for up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is really quiet as in barely audible this outside a price would be the one benefit I would give this system over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift design over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage style it still is available in a hundred and seventy dollars cheaper than the uplift however cheaper does not imply cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s add insult to injury here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is absolutely frustrating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up damaged too my plan for this desk at this moment is to lose the desk top and came with entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furnishings that will last you this at best feels like a cheaper replica of that it just doesn’t feel quality and the difference between this desk and my main desk is night and day do do not hesitate to check out their site too which also feels strangely similar to among their rivals there’s a wealth of devices you can get for the flexi spot desk up to and consisting of a foot massager and even a fixed stationary bicycle and I might spend another 10 minutes of our valuable time covering numerous options and devices I might however I believe I’m better that they just sent a basic desk due to the fact that as a fundamental desk I’m not a fan of the quality control at this cost point and I do not think slapping on a lot of extras is the move when the core item isn’t what it ought to be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years very desk is five years and uplift desk is seven years if you are Flexispot Soutien
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and performance however I would invest the extra money it’s gon na require to enter a higher end manufacturer like uplift desk or very desk and I have not personally utilized very desk products so I can’t speak on it however their track record is excellent huge thanks to flexi spot for sending this out for review sadly I can not advise this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with viewing as how both the desktop and the casters arrived harmed however from a consumer perspective you ‘d probably be truly excited to get this in