today we’re taking a look at a motorized sit-stand desk…Flexispot Stand Up Desk Converter -28 Standing Desk Riser With Deep Keyboard Tray For Laptop (28… you may have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s very simple to put together, and it took my 11-year-old child and I (I mainly simply supervised) under an hour from start to finish.
It’s very sturdy and can hold a lot of weight. Inspect out the video listed below of it operating while there’s a person lying down on it if you do not think me.
The electrical raise/lower function is not only easy to use and quick, however it’s likewise remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to change between the two without giving it much idea.
On top of being practical, it likewise looks terrific in my office (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise valuable if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has choices that are even more affordable than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t necessarily a big fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how sturdy the Flexispot is.
The hassle-free cable tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will need to buy an anti-fatigue mat to stay comfortable, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (since this meant it was going to be strong) and also a little hesitant (because we all know just how much of a challenge assembling furniture can be).
Thankfully, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I like the smooth appearance of this desk. I’m positive any of the many varied finishes that it is available in would look terrific in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, effective, and peaceful to switch in between sitting and standing as lot of times as you want throughout the day.
This desk is tough. It can hold up to 335 pounds even while in operation, so if you have a large desktop computer (or wish to rest on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re taking a look at today is pretty fundamental I attempted to get as close to that as I might on uplifts website with similar configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact 5 inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review but as you should know by now doesn’t affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can perhaps get lacking even any cable grommets for go through the outdoors carton
for the desktop was not harmed in any way which is utterly strange because I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply extremely rough man if I had actually purchased this I ‘d have been on the phone with customer service immediately they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function strangely absolutely where any sort of cable television management products whatsoever the frame on this unit is a single motor dual stage style versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded too to both the double phase dual motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come standard with the control board that allows for up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a rate would be the one benefit I would provide this unit over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% less expensive even if you upgrade this flexi area test to the dual motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift however less expensive does not indicate low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the sound is definitely frustrating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived damaged as well my plan for this desk at this moment is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality workplace furnishings that will last you this at best seems like a less expensive replica of that it just does not feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to take a look at their site also which likewise feels strangely similar to one of their competitors there’s a wealth of accessories you can get for the flexi area desk as much as and consisting of a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our precious time covering numerous options and devices I might however I think I’m happier that they just sent a fundamental desk because as a standard desk I’m not a fan of the quality control at this cost point and I don’t believe slapping on a bunch of bonus is the relocation when the core product isn’t what it should be they do use a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years really desk is 5 years and uplift desk is seven years if you are Flexispot Stand Up Desk Converter -28 Standing Desk Riser With Deep Keyboard Tray For Laptop (28
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and performance however I would spend the money it’s gon na require to enter into a higher end manufacturer like uplift desk or extremely desk and I have not personally utilized extremely desk items so I can’t speak on it but their reputation is very good huge thanks to flexi spot for sending this out for review unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with seeing as how both the desktop and the casters arrived damaged however from a client standpoint you ‘d probably be actually thrilled to get this in